Allied Telesis AT-2450 Series Guía de instalación descargar pdf (Pagina 17)

Network Adapter Card Installation Guide

Installing a Network Adapter Card

This section explains how to install a network adapter card in most PC-

compatible computers.

To install the adapter card, perform the following procedure:

1. Shutdown your PC and disconnect the power cord from the outlet.

2. Remove the PC’s cover by removing the screws from the chassis and

gently sliding off the cover. See Figure 1.

Figure 1 Removing the PC Cover

3. Select an empty, non-shared PCI slot and remove the faceplate.

Keep the faceplate in a safe place. You may need it for future use.

See Figure 2.

Figure 2 Removing the Faceplate From PCI Slot

Note

If you cannot locate or know how to find an PCI slot, refer to the

documentation that came with your PC.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 121 122

Sin comentarios

Allied Telesis AT-2450 Series Guía de instalación Pagina 17