Allied Telesis Patch 89262-08 Manual de usuario descargar pdf (Pagina 37)

Patch 89262-09 For AT-8900 Series Switches add ip filter 37

Patch 89262-09 for Software Release 2.6.2

C613-10402-00 REV I

add ip filter

Syntax ADD IP FILter=filter-number {ACTion=INCLude|EXCLude}

SOurce=ipadd [SMask=ipadd] [ENTry=entry-number] [other-

parameters]

Description This command adds a pattern to a routing filter. For details about the

command parameters, see Table 13 on page 37.

Table 13: Parameters for the BGP route import feature in the add ip filter command.

Availability

Patches can be downloaded from the Software Updates area of the Allied

Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html

. A

licence or password is not required to use a patch.

Parameter Option/Range Description

filter-number

300...399

Filters in the range 300 to 399 are treated as routing filters, and use the action

parameter to specify the action to take with a route that matches the pattern.

ACTion The action to take when the filter pattern is matched.

INCLude Route information matching the filter will be included.

EXCLude Route information matching the filter will be excluded.

SOurce The source IP address, in dotted decimal notation, for the filter pattern.

SMask The mask, in dotted decimal notation, to apply to source addresses for this pattern.

The mask is used to determine the portion of the source IP address in the IP packet

that is significant for comparison with this pattern. The values of source and smask

must be compatible. For each bit in smask which is set to zero (0) the equivalent bit

in source must also be zero (0). If source is not 0.0.0.0, then smask can not be

0.0.0.0. The default is 255.255.255.255, unless source is 0.0.0.0.

ENTry entry-number The entry parameter specifies the entry number in the filter which this new pattern

occupy. Existing patterns with the same or higher entry numbers are pushed down

the filter. The default is to add the new pattern to the end of the filter.

*Caps denote command shortcuts

1 2 ... 32 33 34 35 36 37 38

Sin comentarios

Allied Telesis Patch 89262-08 Manual de usuario Pagina 37