Allied Telesis Patch 89262-08 Manual de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 38
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
36 show ospf Patch Release Note
Patch 89262-09 for Software Release 2.6.2
C613-10402-00 REV I
show ospf
Syntax SHow OSPF
Description This command displays information about the general configuration of OSPF
routing (Figure 3 on page 36, Table 12 on page 36). New entries for the BGP
route import feature are in bold.
Figure 3: Example output from the show ospf command
BGPLimit 1...300 The maximum number of BGP routes that can be imported into OSPF at a time. Once
this limit is reached, importing stops until existing routes are removed. The default
is 300.
*Caps denote command shortcuts
Parameter Option/Range Description
Router ID ....................... 123.234.143.231
OSPF module status .............. Enabled
Area border router status ....... Yes
AS border router status ......... Disabled
PTP stub network generation ..... Enabled
External LSA count .............. 10234
External LSA sum of checksums ... 1002345623
New LSAs originated ............. 10345
New LSAs received ............... 34500
RIP ............................. Off
BGP importing:
Enabled ....................... Yes
Import filter ................. 301
Routes imported/limit ......... 214 / 300
Export static routes ............ Yes
Dynamic interface support ....... None
Number of active areas .......... 10
Logging ......................... Disabled
Debugging ....................... Disabled
AS external default route:
Status ........................ Disabled
Type .......................... 1
Metric ........................ 1
Table 12: Parameters for the BGP route import feature in the output of the show ospf
command.
Parameter Meaning
BGP importing Information about the importing of BGP routes into OSPF.
Enabled Whether or not the importing of BGP routes into OSPF is
enabled; one of “Yes” orNo”.
Import filter The IP filter number used to filter routes before they are
imported into OSPF, or “None” if no filters are used.
Routes imported/limit The number of BGP routes imported into OSPF, and the
maximum number of routes that can be imported at a time.
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38

Comentarios a estos manuales

Sin comentarios