Allied Telesis AT-MC105XL Guía de instalación descargar pdf (Pagina 25)

Chapter 3

Troubleshooting

Follow the guidelines below to test and troubleshoot the installation in the

event a problems occurs.

If the PWR LED is OFF, do the following:

❑ If the media converter is installed on a desktop, check to be sure that

the power adapter is securely connected to a power outlet and that the

power adapter cable is securely connected to the back of the media

converter.

❑ If the media converter is installed in an AT-MCR12 chassis, check that

the unit is fully seated in the slot.

❑ Verify that the power outlet has power by connecting another device

to it.

❑ Try using another power adapter.

If the LNK LED for the twisted pair port is OFF, do the following:

❑ Check that the end-node connected to the port is powered ON and is

operating properly.

❑ Check that the twisted pair port cable is securely connected to the

twisted pair port on the media converter and on the end-node.

❑ Make sure that the twisted pair port cable does not exceed 100 meter

(328 feet) and that you are using a Category 5 or better cable.

❑ Verify that the end-node is operating at 100 Mbps.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Sin comentarios

Allied Telesis AT-MC105XL Guía de instalación Pagina 25