Allied-telesis x610 Series Layer 3 Manual de usuario descargar pdf (Pagina 93)

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide

Cabling an

AT-StackXG

Stacking Module

1. Remove the plastic protector from the connector at one end of the

stacking cable.

1244

Figure 63. Removing the Plastic Protector

2. Connect the cable to either Stack Port 1 or Stack Port 2 on the

stacking module and secure by tightening the two captive

thumbscrews.

3. Remove the plastic protector from the connector at the other end of the

stacking cable and connect it to a Stack Port on the stacking module in

the next switch of the stack. A stacking cable must crossover and

connect to a different port on the next stacking module. Stack Port 1 on

a module must connect to Stack Port 2 on the next module.

Caution

Do not connect two stack Port 1 ports or stack Port 2 ports together.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 127 128

Sin comentarios

Allied-telesis x610 Series Layer 3 Manual de usuario Pagina 93