Allied-telesis FORMULA 8200 Manual de usuario descargar pdf (Pagina 43)

FORMULA 8200 User’s Guide

3-11

Configuring a Virtual Bridge

A virtual bridge is created when you create a VLAN.

To configure bridge parameters for an existing

bridge:

1. Enter the VBRIDGE/CONFIG/BRIDGE <VLAN#> command.

For example, enter:

BRIDGE 1

When you enter this command, a full menu of configurable

choices appears, as shown below:

2. Enter the desired information by entering the item number with

an equal sign (=) and the value.

3. Enter

0 at the prompt to save changes and exit the menu.

Caution

Do not change any of the values unless you are very familiar with

spanning tree parameters and how they affect the status of your

network. Incorrect settings can lead to serious network problems.

For more detailed information about this command and its

parameters, refer to the

VBRIDGE command in Chapter 5.

/VBRIDGE/CONFIG/BRIDGE 1

Spanning Tree Parameters Modification for VLAN 1:

1) Spanning tree Status is ON for this VLAN, set to OFF? (y/n)

2) New Priority (0..65535) (current value is 32768):

3) New Bridge Hello Time (1..10 secs) (current value is 2):

4) New Bridge Max Age (6..40 secs) (current value is 20):

5) New Bridge Forward Delay (4..30 secs)(current value is 15):

6) New Aging Time (10..1000000 secs) (current value is 300):

Enter selection (modification or 0 to commit, c to cancel) >

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 163 164

Sin comentarios

Allied-telesis FORMULA 8200 Manual de usuario Pagina 43