Allied-telesis FORMULA 8200 Manual de usuario Pagina 41
- Pagina / 164
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
FORMULA 8200 User’s Guide
3-9
VLAN/CONFIG/MOVPORT
to move one or more ports.
VLAN/CONFIG/DELPORT<PORT#> <VLAN#> to delete one
or more ports.
You can also use the following commands to change VLAN
configuration:
VLAN/CONFIG/MODIFY <VLAN#> to modify a VLAN.
VLAN/CONFIG/REMOVE <VLAN#> to remove a VLAN.
VLAN/CONFIG/ENABLE <VLAN#> to enable the entire
VLAN.
VLAN/CONFIG/DISABLE <VLAN#> to disable the entire
VLAN.
4. Proceed to the next series of prompts to enable the IP interface
and a virtual router. Refer to the following example (bolded text
represents user entries) and to Table 1-1 for an explanation of
each prompt:
If you enter n at the first prompt, no virtual router is configured
for the VLAN.
Repeat the steps to create additional VLANs.
VLAN 2 is successfully created
Enable IP interface (yes):
y
Virtual router of VLAN 2
IP address: 149.35.101.31
IP Subnet Mask (255.255.255.0): [Enter]
IP Broadcast Address: 149.35.101.255
Router Desription (Router for VLAN2): TESTROUTER
IP RIP mode (Active (a), Silent (s), Deaf (d), Inactive (i)) (s): a
A router is sucessfully configured for VLAN 2
....... Updating system/VLAN configuration ............
Table 1-1: IP Interface and Virtual Router Configuration
Prompt Description
Enable IP
interface
Enter y to enable virtual routing. Enter n if you have an external router.
IP address This address must be on a separate subnet from other VLAN IP addresses.
Subnet mask All subnet masks for the VLANs must be the same. The FORMULA 8200 does not
support variable length subnet masks.
RIP mode Active provides IP routing between VLANs with RIP, sends RIP messages every 30
seconds, and updates routing tables.
Silent does not provide IP routing between VLANs or send IP messages, but updates
routing tables.
Deaf or inactive does not provide routing between VLANs, does not send RIP
messages, and does not update routing tables.
- USER’S GUIDE 1
- Table of Contents 3
- Chapter 3 4
- Chapter 4 4
- Who Should Use This Guide 8
- How This Guide Is Organized 9
- To install the switch on a 10
- Related Documents 11
- Recommended Reading 12
- Overview 15
- Accessing the Command Line 17
- Interface (CLI) 17
- Connecting the Console 18
- Observing the 20
- Logging In 22
- Without a 23
- Password 23
- To log in without a password: 23
- Entering Commands 24
- The LOOKUP 25
- Through the 26
- Configuring IP Information 27
- (example): 30
- Where to Go Next 31
- Configuring the FORMULA 8200 33
- Virtual LANs 34
- FORMULA 8200 35
- Implementation 35
- of VLANs 35
- Figure 3-2: Multiple VLANs 36
- Virtual Bridges 37
- Interfaces 37
- Virtual Routers 37
- Figure 3-3: Data Looping 38
- To configure a VLAN: 40
- to move one or more ports 41
- VLAN/SHOW/VLAN 2 42
- Configuring a Virtual Bridge 43
- Operating and Managing the 47
- FORMULA 8200 Switch 47
- Using Online Help 48
- Using Ethernet Port Mirroring 55
- 1 0 Receive 56
- 0 0 Reset (clear snoop port) 56
- /VBRIDGE/SHOW/PORT 1 63
- VLAN ARL 64
- /ETHERNET/SHOW/SRCCNT 64
- Upgrading Firmware 65
- In Case of 71
- Problems With 71
- Modifying the IP RIP Mode 73
- Configuring Static Routes 74
- Configuring SNMP Parameters 76
- Displaying SNMP Parameters 77
- ATM and FDDI Support 83
- Command Edit Mode 84
- ALIAS Command 85
- ALLCMD Command 86
- ATM Command 87
- BOOT Command 88
- CONSOLE Command 90
- command: 91
- ELOG Command 92
- ETHERNET Command 95
- display 100
- ETHERNET/SHOW/STAT Example 101
- Use the 101
- EXIT Command 102
- FILE Command 103
- Command Reference 104
- INET Command 105
- FORMULA 8200 User’s Guide 107
- LOOKUP Command 108
- MODE Command 109
- PORTSERV Command 111
- REBOOT Command 112
- SNMP Command 113
- SNMP/CONFIG Example 114
- command 114
- A similar display appears: 114
- SYSTEM Command 116
- TFTP Command 117
- TOP Command 118
- UP Command 119
- VBRIDGE Command 120
- Table 5-17 123
- /VBRIDGE/SHOW/BRIDGE 1 126
- Table 5-19 127
- VBRIDGE/SHOW/FWT command 128
- /VBRIDGE/SHOW/FWT 128
- 1 7 0 00:a0:d2:c1:55:01 — 5 128
- 1 33 0 00:60:e8:ff:ff:50 — 0 128
- VLAN Command 129
- Command Summary 131
- RMON Configuration 141
- MIB Support 142
- RMON Configuration 144
- RMON Support 145
- Disabling 146
- RMON Objects 146
- Downloading Software at the 147
- [VxWorks] Prompt 147
- ❑ Castle Rock’s SNMPc 148
- Backing Up 149
- Your Current 149
- Configurations 149
- Configuring for 150
- Download 150
- Downloading 151
- Using FTP/TFTP 151
- [VxWorks Boot]: c 154
- [VxWorks Boot]:@ 154
- Restoring Your 155
- Firmware Upgrade Using Zmodem 156
- [VxWorks Boot]: @ 158
Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis FORMULA 8200
(32 paginas)
(19 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.139 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales