Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 235)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

AT-9816GB

Device Manager LEDs for AT-9800 Series

LED State Description

PWR

Green The switch is receiving power from the main power supply.

Red Main power supply is either off or has failed.

RPS

Green

Red

The switch is receiving power from the redundant power supply.

RPS has failed.

Gray RPS is not installed or RPS monitoring is disabled.

DUPLEX

Green The port is operating at full duplex.

Orange The port is operating at half duplex.

Note - AT-9812T, AT-9812TF and AT-9812T-DC share the same device image.

Note - AT-9816GB, AT-9816GF and AT-9816GB-DC share the same device image.

Note - To turn RPS monitoring on or off on the switch, from the switch command line interface

enter the command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring

is on, use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Note - The current firmware version does not allow AT-View Plus Device Manager to support

the RPS LED on the DC models.

PN 613-50665-00 Rev C Page 235 of 294

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 293 294

Sin comentarios

Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manual de usuario Pagina 235