
Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Rapier 24i
Device Manager LEDs for Rapier 24 and 24i
LED State Description
PWR
Green
Red
The switch is receiving power from the main power supply.
Main power supply is either off or has failed.
RPS
Green
Red
Gray
The switch is receiving power from the redundant power supply.
RPS has failed.
RPS is not installed or RPS monitoring is disabled.
DUPLEX
Green
Orange
The port is operating at full duplex.
The port is operating at half duplex.
Note - The current firmware version does not allow AT-View Plus Device Manager to support
the Reset button.
Note - Please refer to Uplink Modules
for the operations and behavior of the uplink modules
installed in this device.
Note - Please refer to Network Service Modules
for the operations and behavior of the NSM
installed in this device.
PN 613-50665-00 Rev C Page 177 of 294
Comentarios a estos manuales