Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 211)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

AT-View Plus Device Manager detects that the established link speed is less than 1Gbps, only

the RJ-45 port images will turn green.

Note - When multiple units of the AT-9700 series are stacked together, port numbering is

continuous based on the Box ID.

• Box ID 1 - 1 to 64

• Box ID 2 - 65 to 128

• Box ID 3 - 129 to 192

• Box ID 4 - 193 to 256

• Box ID 5 - 257 to 320

• Box ID 6 - 321 to 384

• Box ID 7 - 385 to 448

• Box ID 8 - 449 to 512

• Box ID 9 - 513 to 576

• Box ID 10 - 577 to 640

• Box ID 11 - 641 to 704

• Box ID 12 - 705 to 768

This numbering scheme assumes that a unit can have a maximum of 64 ports.

Agent Menu

From the Agent menu, you can view and edit the system information for the switch, or log into

the CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and

description.

Device Info

Equipment Capacity

Displays the equipment capacity supported in the system.

Power Supply Info

Displays information about the power supply and redundant power supply .

Fan Info

Displays the fan status.

Unit Info

Displays information about the system's stacking mode, units supported in the system,

total number of ports and number of ports in use.

Unit Management Info

Displays the management information for each unit in the system.

Note - The current firmware version does not allow the Control Mode parameter to be

configured.

PN 613-50665-00 Rev C Page 211 of 294

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 293 294

Sin comentarios

Allied-telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT Manual de usuario Pagina 211