Allied-telesis AT-VIEW PLUS 3.0 AMIGO Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Allied Telesyn AT-VIEW PLUS
AMIGO
SNMP version
The version of SNMP that the device will use to send and receive device information. After
choosing the version of SNMP to use, click on the Settings button to specify the SNMP
parameters that correspond with the chosen version. If the SNMP version is set to "v1" or
"v2c", then the SNMP v1/v2c Settings dialog box will be displayed. Otherwise, if the SNMP
version is set to "v3", then the SNMP v3 Settings dialog box will be displayed.
Target Host Property dialog box
4.1.6.3.1 SNMP v1 / v2c Settings
Community for read/Community for write
The community strings used to perform SNMP operations on the device.
SNMP v1/v2c Settings dialog box
PN 613-50662-00 Rev A Page 27 of 43
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 42 43

Comentarios a estos manuales

Sin comentarios