Allied-telesis AT-TQ Series Manual de usuario descargar pdf (Pagina 44)

Chapter 3: Manage Menu

Table 2. Modify Wireless Settings Window

Field Description

Radio On Off Enables or disables the radio. The

selections are described here:

- On: Enables the radio. You have to

enable a radio before you can configure

its parameter settings.

- Off: Disables the radio. This is the

default setting.

MAC Address Displays the MAC address of the radio.

This value cannot be changed

Mode Specifies the Physical Layer (PHY)

standard of the radio. The available

modes depend on the radio and country.

The modes are:

- IEEE 802.11a: The access point accepts

only 802.11a clients.

- IEEE 802.11b/g: The access point

accepts only 802.11b and 802.11g clients.

- IEEE 802.11a/n: The access point

accepts only 802.11a and 802.11n clients

operating at 5 GHz. This is the default

setting for the 5 GHz radio.

- IEEE 802.11b/g/n: The access point

accepts 802.11b, 802.11g, and 802.11n

clients operating at 2.4 GHz. This is the

default setting for the 2.4 GHz radio.

- 2.4 GHz IEEE 802.11n: The access

point accepts only 802.11n clients

operating at 2.4 GHz.

- 5 GHz IEEE 802.11n: The access point

accepts only 802.11n clients operating at

5 GHz.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 171 172

Sin comentarios

Allied-telesis AT-TQ Series Manual de usuario Pagina 44