Allied-telesis AT-TQ Series Manual de usuario descargar pdf (Pagina 162)

Chapter 7: Maintenance Menu

162

Restoring the Default Settings to the Access Point

This procedure explains how to restore the default settings on the access

point. Please review the following information before performing the

procedure:

 The manager name and password are reset to “manager” and

“friend”, respectively.

 If the access point has a static IP address, the address is deleted

and the DHCP client is activated. If the device does not receive a

response from a DHCP server on the LAN port, it uses the default

IP address 192.168.1.230.

Note

The access point stops forwarding network traffic when it is returned

to its default settings because the default setting for the radios is off.

To activate the default settings on the access point, perform the following

procedure:

1. From the Maintenance menu, select Configuration.

The access point displays the “Manage this Access Point’s

Configuration” window shown in Figure 54 on page 163.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 171 172

Sin comentarios

Allied-telesis AT-TQ Series Manual de usuario Pagina 162