Allied-telesis AT-S70 Manual de usuario descargar pdf (Pagina 20)

Chapter 2: Starting a Local or Telnet Management Session

Using the Terminal Interface

If you are using a DEC VT100 or ANSI (the default) terminal configuration,

it is helpful to know how to select a menu option in the terminal interface.

Table 1 lists the instructions on how to move through the menus and

select menu options.

Enabled options in menus are preceded with a > symbol. In the following

example, the first option is enabled:

>Enable this port

Disable this port

When you press <Enter> to select a field in which you can enter a value,

the -> symbol is displayed. For example:

System name: ->

The -> symbol indicates that you can enter a new value for the parameter

or change the existing value. Once you have entered a value, press

<Enter>. Parameter changes are immediately activated on a Converteon

module.

Table 1. Menu Selection Options

When directed to You must

Select an option Highlight the option by pressing the Up ( ↑ ) or

Down ( ↓ ) arrow key; then press <Return>

Type the first character of the desired option at

the prompt and press <Return>.

If two or more options have matching initial

characters, type the initial characters until the

option you want is highlighted; then press

<Return>.

Enter information (for

example, the IP address

of a chassis)

Type the information and press <Return>.

Return to the previous

screen

Press <Esc> or select the “Return to...” option at

the bottom of the menu.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 131 132

Sin comentarios

Allied-telesis AT-S70 Manual de usuario Pagina 20