Allied-telesis AT-S70 Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
AT-S70 Management Software User’s Guide
105
OAM Loopback Test
This section contains the procedures on how to manage the OAM
loopback test.
Enabling or
Disabling Remote
Loopback Test
To enable or disable the OAM remote loopback test, perform the following
procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, as shown in Figure 2 on
page 91, is displayed.
2. Select a line card on which you want to configure.
3. Press <Return>.
The Module Configuration Menu, as shown in Figure 4 on page 92, is
displayed.
4. Select the port that you want to configure the OAM operations on.
5. Press <Return>.
The Port Management Menu, as shown in Figure 6 on page 92, is
displayed.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu, as shown in Figure 7 on page 93, is
displayed.
7. From the OAM Configuration Menu, select the OAM Loopback Test
Menu.
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 131 132

Comentarios a estos manuales

Sin comentarios