Allied-telesis AT-S70 Manual de usuario Pagina 102

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 101
Chapter 8: Operations, Administration, and Maintenance (OAM)
102
Displaying
Remote OAM
Information
To display the status on the remote OAM, perform the following
procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, as shown in Figure 2 on
page 91, is displayed.
2. Select a line card on which you want to configure.
3. Press <Return>.
The Module Configuration Menu, as shown in Figure 4 on page 92, is
displayed.
4. Select the port that you want to configure the OAM operations on.
5. Press <Return>.
The Port Management Menu, as shown in Figure 6 on page 92, is
displayed.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu, as shown in Figure 7 on page 93, is
displayed.
7. From the OAM Configuration Menu, select the Show Remote OAM
Information Menu.
Vista de pagina 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 131 132

Comentarios a estos manuales

Sin comentarios