Allied-telesis AT-S47 Manual de usuario descargar pdf (Pagina 19)

AT-S47 Management Software User’s Guide

Using the Terminal Interface

If you are using a DEC VT100 or ANSI (the default) terminal configuration,

refer to the table below for instructions on how to move through the

menus and to make menu selections:

Activated options are preceded by a > symbol. In the following example,

the first option is activated:

> Port active

Port shutdown

When you press the Enter key to select a field in which you can enter a

value, the -> symbol is displayed. For example:

IP address: ->

The -> symbol indicates that you can enter a new value for the

parameter or change the existing value. Once you have entered a value,

press the Enter key again. To delete an existing value to a parameter

without assigning a new value, type a space and press the Enter key.

Parameter changes are activated on the multiplexer immediately.

When directed to You must

Select an option Highlight the option by pressing the

Up ( ↑ ) or Down ( ↓ ) arrow key; then

press the Enter key.

Type the first character of the desired

option at the prompt and press the

Enter key.

Enter information (for

example, the IP address of

the multiplexer)

Type the information and press the

Enter key.

Return to the previous

screen

Select the “Return” option at the

bottom of the menu

Press the Esc key.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 153 154

Sin comentarios

Allied-telesis AT-S47 Manual de usuario Pagina 19