Allied-telesis AT-S47 Manual de usuario descargar pdf (Pagina 135)

AT-S47 Management Software User’s Guide

135

DISABLE CONSOLE

Syntax

disable console [echo]

Parameters

None.

Description

This command deactivates local management of the multiplexer. When

the console is deactivated, you cannot manage the multiplexer using

the RS232 port on the management module. (This is referred to as local

management.) The only way to manage the unit would be using Telnet.

The default for local management is enabled.

You can also use this command to set the duplex mode to half-duplex

(no echo) on the RS232 console port of the management module. To set

the console port to full-duplex, refer to the ENABLE CONSOLE command.

Example

The following command disables the RS232 port on the management

module so that the multiplexer cannot be managed locally:

disable console

The following command configures the RS232 port to half-duplex (no

echo):

disable console echo

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 153 154

Sin comentarios

Allied-telesis AT-S47 Manual de usuario Pagina 135