Allied-telesis AT-S41 Manual de usuario Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 236
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
AT-S41 User’s Guide
72
Setting Port Trunk Status
To enable or disable a port trunk, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type T to select the
Trunk Configuration Menu.
3. Type I to choose Select Stack ID and enter the ID number of the switch
in the stack containing the port trunk you want to enable or disable.
4. From the Trunk Configuration Menu, type S to select Set Trunk Status.
The following prompt is displayed:
Enter trunk group number->
Enter the number of the port trunk group that you want to enable
or disable.
The following prompt is displayed:
Enable or Disable trunk group 1 (E/D)>
5. Type E to enable the port trunk group or type D to disable the port
trunk group.
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 235 236

Comentarios a estos manuales

Sin comentarios