Allied-telesis AT-GS950/10PS Manual de usuario descargar pdf (Pagina 49)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide

4. Have another person hold the switch at the wall location where the

switch is to be installed, while you use a pencil or pen to mark the wall

with the locations of the four holes in the brackets. The switch should

be oriented such that its front faceplate is facing up and is level to the

floor. See Figure 24.

Figure 24. Marking the Screw Hole Locations

5. Install the four plastic anchors included with the switch into the wall, at

the locations marked in the previous step. The anchors require 0.635

mm (0.25 in.) holes.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Sin comentarios

Allied-telesis AT-GS950/10PS Manual de usuario Pagina 49