Allied-telesis AT-GS2002/SP Manual de usuario descargar pdf (Pagina 25)

AT-GS2002/SP Gigabit Ethernet to Fiber SFP Media Converter Installation Guide

Twisted-Pair Port

LEDs

The twisted-pair port LEDs indicate the operating status of the twisted-pair

port (Port 2) on the AT-GS2002 Series converter. Refer to Figure 3 on

page 23 for the location of these LEDs. The link, activity, and Auto-

Negotiation functions are defined in Table 4 and the speed LEDs are

defined in Table 5.

Note

Refer to Table 7, “Rear Panel DIP Switch Settings” on page 34 to

configure the Auto-negotiation, speed, and duplex features

Table 4. Twisted-Pair Port LINK/ACT/AUTO-NEG LEDs

LED Color Description

LINK

Green A valid link is established on the port with its link-partner.

Blinking

Green

Indicates that when the AT-GS2002/SP Media Converter

is in SML mode, and the LINK has been dropped because

the LINK on the other port is lost.

Off A valid link is not established on the port with its link-

partner.

ACT

Blinking

Green

Indicates that the port is transmitting and/or receiving data

packets.

Off Indicates that there is no activity on the port.

AUTO

NEG

Green Indicates that the port Auto-Negotiation is ON.

Off Indicates that the port Auto-Negotiation is OFF.

Table 5. Twisted-Pair Port 100/1000 LEDs

Speed LEDs

Description

10M 100M

Off Off

Indicates that the port is not linked to its end-node.

Green Off

Indicates that the port is operating at 10 Mbps.

Off Green

Indicates that the port is operating at 100 Mbps.

Green Green

Indicates that the port is operating at 1000 Mbps.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-GS2002/SP Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-GS2002/SP