Allied-telesis AT-8100 Series Manual de usuario Pagina 195
- Pagina / 196
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AT-8100 Switch Command Line User’s Guide
195
To remove threshold limits from the ports, use the NO STORM-CONTROL
command, also in the Port Interface mode. This example removes the
threshold limit for broadcast packets on port 12:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12
awplus(config-if)# no storm-control broadcast
This example disables unknown unicast rate limiting on port 5, 6, and 15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5,port1.0.6,port1.0.15
awplus(config-if)# no storm-control dlf
This example removes the threshold limit for multicast packets on port 23:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23
awplus(config-if)# no storm-control multicast
For reference information, refer to “STORM-CONTROL” on page 254 and
“NO STORM-CONTROL” on page 226.
- AT-8100 Series 1
- Copyright 2
- Contents 10
- Document Conventions 48
- Contacting Allied Telesis 50
- Getting Started 51
- AlliedWare Plus Command Line 53
- Interface 53
- Management Sessions 54
- Remote Telnet Management 55
- Web Browser Windows 55
- Management Interfaces 57
- Local Manager Account 58
- AlliedWare Plus Command Modes 59
- Moving Down the Hierarchy 62
- Moving Up the Hierarchy 67
- DISABLE command 68
- Port Numbers in Commands 69
- Command Format 71
- Startup Messages 72
- Starting a Management Session 75
- What to Configure First 80
- Changing the 81
- Login Password 81
- Assigning a Name 81
- Adding a 82
- Management IP 82
- Saving Your 84
- Ending a Management Session 85
- Basic Command Line Management 87
- Clearing the Screen 88
- Displaying the On-line Help 89
- ? (Question Mark Key) 95
- CLEAR SCREEN 97
- CONFIGURE TERMINAL 98
- Parameters 100
- Description 100
- Parameter 101
- Examples 102
- Chapter 5 111
- Controlling Eco-Mode LED 114
- Temperature and Fan Control 115
- ECOFRIENDLY LED 116
- NO ECOFRIENDLY LED 117
- SHOW ECOFRIENDLY 118
- SHOW SYSTEM ENVIRONMENT 119
- Basic Operations 123
- Basic Switch Management 125
- Adding a Name to the Switch 126
- Contact: JordanB 127
- Displaying Parameter Settings 128
- Pinging Network Devices 130
- Resetting the Switch 131
- filename2 133
- “SHOW BAUD-RATE” on page 168 135
- Configuring the Banners 139
- Chapter 8 143
- BANNER EXEC 145
- BANNER LOGIN 147
- BANNER MOTD 149
- BAUD-RATE SET 151
- CLOCK SET 152
- ERASE STARTUP-CONFIG 153
- EXEC-TIMEOUT 154
- HOSTNAME 157
- LINE CONSOLE 158
- LINE VTY 159
- NO HOSTNAME 160
- PING IPv6 163
- SERVICE MAXMANAGER 166
- SHOW BANNER LOGIN 167
- SHOW BAUD-RATE 168
- SHOW CLOCK 169
- SHOW RUNNING-CONFIG 170
- SHOW SWITCH 171
- SHOW SYSTEM 173
- SHOW SYSTEM SERIALNUMBER 174
- SHOW USERS 175
- SHOW VERSION 177
- SNMP-SERVER CONTACT 178
- SNMP-SERVER LOCATION 179
- SYSTEM TERRITORY 180
- Port Parameters 183
- Adding Descriptions 184
- Chapter 9: Port Parameters 186
- Enabling or Disabling Ports 188
- Resetting Ports 193
- Displaying Port 200
- Displaying SFP Information 202
- Port Parameter Commands 203
- Command Mode Description 205
- BACKPRESSURE 206
- CLEAR PORT COUNTER 209
- DESCRIPTION 210
- EGRESS-RATE-LIMIT 214
- FCTRLLIMIT 215
- FLOWCONTROL 216
- HOLBPLIMIT 219
- NO EGRESS-RATE-LIMIT 222
- NO FLOWCONTROL 223
- NO SHUTDOWN 224
- NO STORM-CONTROL 226
- POLARITY 227
- RENEGOTIATE 230
- SHOW FLOWCONTROL INTERFACE 232
- SHOW INTERFACE 234
- Interface Port number 235
- SHOW INTERFACE BRIEF 238
- SHOW INTERFACE STATUS 240
- SHOW RUNNING-CONFIG INTERFACE 245
- SHOW STORM-CONTROL 246
- SHOW SYSTEM PLUGGABLE 248
- SHOW SYSTEM PLUGGABLE DETAIL 249
- SHUTDOWN 250
- STORM-CONTROL 254
- Power Over Ethernet 257
- Prioritization 259
- Enabling and Disabling PoE 260
- Prioritizing Ports 263
- Managing Legacy PDs 265
- Monitoring Power Consumption 266
- Displaying PoE Information 267
- Power Over Ethernet Commands 269
- NO POWER-INLINE ALLOW-LEGACY 272
- NO POWER-INLINE DESCRIPTION 273
- NO POWER-INLINE ENABLE 274
- NO POWER-INLINE MAX 275
- NO POWER-INLINE PRIORITY 276
- NO SERVICE POWER-INLINE 278
- POWER-INLINE ALLOW-LEGACY 280
- POWER-INLINE DESCRIPTION 281
- POWER-INLINE ENABLE 282
- POWER-INLINE MAX 283
- POWER-INLINE PRIORITY 284
- POWER-INLINE USAGE-THRESHOLD 286
- SERVICE POWER-INLINE 287
- SHOW POWER-INLINE 288
- SHOW POWER-INLINE INTERFACE 293
- Chapter 13 299
- Adding an IPv4 303
- Management 303
- Default Gateway 305
- Deleting an IPv4 306
- Address and 306
- Displaying an 307
- Adding an IPv6 308
- Deleting an IPv6 310
- CLEAR IPV6 NEIGHBORS 315
- 143.87.132.45: 321
- IPV6 ADDRESS 322
- IPV6 ROUTE 324
- 45ab:672:934c::78:17cb: 325
- NO IPV6 ADDRESS 329
- NO IPV6 ROUTE 330
- SHOW IPV6 INTERFACE 335
- SHOW IPV6 ROUTE 336
- Chapter 15 337
- SNTP Server 339
- Disabling the SNTP Client 342
- Displaying the SNTP Client 343
- Displaying the Date and Time 344
- SNTP Client Commands 345
- CLOCK SUMMER-TIME 346
- CLOCK TIMEZONE 347
- NO CLOCK SUMMER-TIME 348
- NO NTP PEER 349
- NTP PEER 350
- PURGE NTP 351
- SHOW NTP ASSOCIATIONS 353
- SHOW NTP STATUS 355
- Domain Name System (DNS) 357
- IP NAME-SERVER 366
- IP DOMAIN-NAME 368
- IP DOMAIN-LIST 369
- IP DOMAIN-LOOKUP 371
- SHOW IP NAME-SERVER 372
- SHOW IP DOMAIN-NAME 373
- SHOW HOSTS 374
- Adding Static MAC Addresses 378
- Deleting MAC Addresses 380
- Setting the Aging Timer 382
- Chapter 19: MAC Address Table 384
- MAC Address Table Commands 385
- CLEAR MAC ADDRESS-TABLE 386
- MAC ADDRESS-TABLE AGEING-TIME 388
- MAC ADDRESS-TABLE STATIC 390
- NO MAC ADDRESS-TABLE STATIC 392
- SHOW MAC ADDRESS-TABLE 394
- Active Boot 400
- Initialization 401
- Processes 401
- Chapter 21: Hardware Stacking 406
- Stacking Commands 409
- SHOW STACK 410
- renumber 411
- Chapter 22: Stacking Commands 412
- Chapter 23: Enhanced Stacking 416
- Save the configuration 419
- Configuring a Member Switch 420
- Member Switches 426
- Disabling Enhanced Stacking 435
- Enhanced Stacking Commands 437
- ESTACK COMMAND-SWITCH 439
- ESTACK RUN 440
- NO ESTACK COMMAND-SWITCH 441
- NO ESTACK RUN 442
- RCOMMAND 443
- REBOOT ESTACK MEMBER 444
- SHOW ESTACK 446
- SHOW ESTACK COMMAND-SWITCH 448
- SHOW ESTACK REMOTELIST 449
- UPLOAD CONFIG REMOTELIST 451
- UPLOAD IMAGE REMOTELIST 452
- Link-flap Protection 455
- Configuring the Feature 458
- Link-flap Protection Commands 459
- LINK-FLAP DURATION 460
- LINK-FLAP PROTECTION 461
- LINK-FLAP RATE 462
- NO LINK-FLAP PROTECTION 463
- SHOW LINK-FLAP 464
- Port Mirror 465
- Chapter 27: Port Mirror 468
- Displaying the Port Mirror 471
- Port Mirror Commands 473
- MIRROR INTERFACE 475
- NO MIRROR INTERFACE 477
- SHOW MIRROR 478
- DHCP Relay Overview 481
- Agent Option 82 483
- Client Requests 484
- Message Length 485
- Adding the IP 486
- Addresses of the 486
- DHCP Servers 486
- Adding DHCP 487
- Relay to the 487
- Option 82 489
- DHCP Relay Commands 493
- IP DHCP-RELAY 495
- IP DHCP-RELAY AGENT-OPTION 496
- IP DHCP-RELAY MAXHOPS 501
- IP DHCP-RELAY SERVER-ADDRESS 502
- NO IP DHCP-RELAY 503
- NO IP DHCP-RELAY AGENT-OPTION 504
- 214.154.35.78 506
- NO SERVICE DHCP-RELAY 507
- SERVICE DHCP-RELAY 508
- SHOW IP DHCP-RELAY 509
- Group Link Control 511
- Configuration Examples 521
- Group Link Control Commands 525
- GROUP-LINK-CONTROL 526
- GROUP-LINK-CONTROL DOWNSTREAM 527
- GROUP-LINK-CONTROL UPSTREAM 529
- NO GROUP-LINK-CONTROL 530
- SHOW GROUP-LINK-CONTROL 533
- Multicast Commands 535
- File System 541
- destinationfile 545
- Chapter 34: File System 548
- File System Commands 551
- DELETE FORCE 554
- SHOW FILE SYSTEMS 557
- Boot Configuration Files 559
- Chapter 37 565
- BOOT CONFIG-FILE 566
- COPY RUNNING-CONFIG 568
- NO BOOT CONFIG-FILE 571
- SHOW BOOT 572
- SHOW STARTUP-CONFIG 574
- File Transfer 577
- Downloading 579
- Software with 579
- Files to the 580
- Switch with 580
- Uploading Files 581
- 20100601091645.txt 582
- Waiting to send 585
- Chapter 38: File Transfer 586
- File Transfer Commands 589
- COPY FILENAME ZMODEM 590
- COPY FLASH TFTP 591
- COPY TFTP FLASH 592
- COPY ZMODEM 594
- Snooping 597
- (IGMP) Snooping 599
- Host Node Topology 602
- Enabling IGMP Snooping 603
- Disabling IGMP Snooping 606
- Displaying IGMP Snooping 607
- IGMP Snooping Commands 609
- CLEAR IP IGMP 610
- IP IGMP LIMIT 611
- IP IGMP QUERIER-TIMEOUT 612
- IP IGMP SNOOPING 613
- IP IGMP SNOOPING MROUTER 616
- IP IGMP STATUS 617
- NO IP IGMP SNOOPING 618
- NO IP IGMP SNOOPING MROUTER 619
- SHOW IP IGMP SNOOPING 620
- Assigning 625
- Multiple Queriers 625
- .2 Enabled Enabled Active 626
- .3 Enabled Disabled None 627
- .4 Enabled Enabled Standby 627
- Configuring 630
- Chapter 43 633
- IP IGMP QUERY-INTERVAL 634
- IP IGMP SNOOPING QUERIER 635
- NO IP IGMP SNOOPING QUERIER 636
- SHOW IP IGMP INTERFACE 637
- DHCP Snooping Commands 639
- ARP SECURITY 641
- ARP SECURITY VIOLATION 642
- CLEAR ARP SECURITY STATISTICS 644
- IP DHCP SNOOPING 648
- IP DHCP SNOOPING AGENT-OPTION 649
- IP DHCP SNOOPING BINDING 651
- IP DHCP SNOOPING MAX-BINDINGS 655
- IP DHCP SNOOPING TRUST 659
- IP DHCP VERIFY MAC-ADDRESS 660
- IP DHCP SNOOPING VIOLATION 662
- IP SOURCE BINDING 664
- SERVICE DHCP SNOOPING 666
- SHOW ARP SECURITY 668
- SHOW ARP SECURITY INTERFACE 670
- SHOW ARP SECURITY STATISTICS 672
- SHOW IP DHCP SNOOPING 674
- SHOW IP DHCP SNOOPING BINDING 676
- SHOW IP SOURCE BINDING 680
- Event Messages 683
- Event Log 685
- Displaying the Event Log 687
- Clearing the Event Log 688
- Event Log Commands 689
- CLEAR LOG 691
- CLEAR LOG BUFFERED 692
- CLEAR LOG PERMANENT 693
- LOG BUFFERED 694
- LOG CONSOLE 696
- LOG PERMANENT 698
- NO LOG BUFFERED 699
- OUtputID Type Status Details 700
- NO LOG CONSOLE 701
- NO LOG PERMANENT 702
- SHOW LOG 704
- SHOW LOG CONFIG 707
- SHOW LOG PERMANENT 709
- SHOW LOG PERMANENT TAIL 710
- SHOW LOG REVERSE 711
- SHOW LOG TAIL 712
- Syslog Client 713
- program 715
- Chapter 47: Syslog Client 716
- Syslog Client Commands 721
- LOG HOST 722
- NO LOG HOST 724
- Port Trunks 727
- Static Port Trunks 729
- Source IP Address (Layer 3) 731
- Displaying Static Port Trunks 737
- Static Port Trunk Commands 739
- NO STATIC-CHANNEL-GROUP 740
- PORT-CHANNEL LOAD-BALANCE 741
- SHOW STATIC-CHANNEL-GROUP 743
- STATIC-CHANNEL-GROUP 744
- Chapter 51 747
- Load Distribution 749
- Creating New Aggregators 751
- Adding Ports to Aggregators 753
- Deleting Aggregators 755
- Displaying Aggregators 756
- LACP Commands 759
- CHANNEL-GROUP 760
- LACP SYSTEM-PRIORITY 762
- NO CHANNEL-GROUP 763
- SHOW ETHERCHANNEL 766
- SHOW ETHERCHANNEL DETAIL 767
- Chapter 52: LACP Commands 768
- SHOW ETHERCHANNEL SUMMARY 769
- SHOW LACP SYS-ID 770
- SHOW PORT ETHERCHANNEL 771
- Spanning Tree Protocols 773
- STP, RSTP and MSTP Protocols 775
- Path Costs and Port Costs 778
- Port Priority 779
- Point-to-Point and Edge Ports 782
- Mixed STP and RSTP Networks 785
- Spanning Tree and VLANs 786
- RSTP and MSTP BPDU Guard 787
- STP, RSTP, MSTP Loop Guard 789
- STP and RSTP Root Guard 794
- Spanning Tree Protocol (STP) 795
- Setting the Switch Parameters 798
- Setting the Port Parameters 800
- Displaying STP Settings 802
- STP Commands 803
- Chapter 55: STP Commands 804
- NO SPANNING-TREE STP ENABLE 805
- SHOW SPANNING-TREE 806
- SPANNING-TREE FORWARD-TIME 808
- SPANNING-TREE GUARD ROOT 809
- SPANNING-TREE HELLO-TIME 810
- SPANNING-TREE MAX-AGE 811
- SPANNING-TREE MODE STP 812
- SPANNING-TREE PATH-COST 813
- SPANNING-TREE PORTFAST 814
- SPANNING-TREE STP ENABLE 818
- Setting the 822
- Forward Time 822
- Hello Time, and 822
- Setting the Bridge 823
- Priority 823
- Enabling or 823
- Disabling BPDU 823
- Configuring Port 825
- Displaying RSTP Settings 830
- RSTP Commands 831
- Chapter 57: RSTP Commands 832
- NO SPANNING-TREE PORTFAST 833
- NO SPANNING-TREE LOOP-GUARD 835
- NO SPANNING-TREE RSTP ENABLE 837
- SPANNING-TREE LINK-TYPE 845
- SPANNING-TREE LOOP-GUARD 846
- SPANNING-TREE MODE RSTP 848
- SPANNING-TREE RSTP ENABLE 854
- Chapter 58 855
- MSTI Guidelines 860
- VLAN and MSTI Associations 861
- Ports in Multiple MSTIs 862
- Summary of Guidelines 868
- Associating VLANs to MSTIs 870
- MSTP Root Guard 874
- MSTP Commands 875
- Chapter 59: MSTP Commands 876
- INSTANCE MSTI-ID PRIORITY 877
- INSTANCE MSTI-ID VLAN 879
- NO SPANNING-TREE MSTP ENABLE 882
- SHOW SPANNING-TREE MST CONFIG 884
- SHOW SPANNING-TREE MST 885
- SPANNING-TREE MODE MSTP 890
- SPANNING-TREE MSTP ENABLE 891
- SPANNING-TREE MST INSTANCE 893
- <region-name> 897
- REVISION 898
- Virtual LANs 899
- Port-based and Tagged VLANs 901
- Port-based VLANs 903
- Tagged VLANs 903
- Port-based VLAN Overview 904
- Port VLAN 905
- Identifier 905
- Port-based 907
- Example 1 907
- Example 2 907
- Tagged VLAN Overview 910
- Tagged VLAN 912
- Creating VLANs 915
- Adding Tagged Ports to VLANs 918
- Displaying the VLANs 923
- Port-based and Tagged VLAN 925
- NO SWITCHPORT ACCESS VLAN 926
- NO SWITCHPORT TRUNK 927
- SHOW VLAN 930
- SWITCHPORT ACCESS VLAN 932
- SWITCHPORT MODE ACCESS 934
- SWITCHPORT MODE TRUNK 935
- SWITCHPORT TRUNK ALLOWED VLAN 937
- SWITCHPORT TRUNK NATIVE VLAN 940
- Chapter 62 945
- Figure 177. GVRP Example 947
- GVRP and Network Security 950
- Enabling GVRP on the Switch 952
- Enabling GIP on the Switch 953
- Enabling GVRP on the Ports 954
- Setting the GVRP Timers 955
- Disabling GVRP on the Ports 957
- Disabling GIP on the Switch 958
- Disabling GVRP on the Switch 959
- Displaying GVRP 961
- CONVERT DYNAMIC VLAN 965
- GVRP APPLICANT STATE ACTIVE 966
- GVRP APPLICANT STATE NORMAL 967
- GVRP ENABLE 968
- GVRP REGISTRATION 969
- GVRP TIMER JOIN 970
- GVRP TIMER LEAVE 971
- GVRP TIMER LEAVEALL 972
- NO GVRP ENABLE 973
- NO GVRP TIMER JOIN 974
- NO GVRP TIMER LEAVE 975
- NO GVRP TIMER LEAVEALL 976
- PURGE GVRP 977
- SHOW GVRP APPLICANT 978
- SHOW GVRP CONFIGURATION 979
- SHOW GVRP MACHINE 980
- SHOW GVRP STATISTICS 981
- Receive GARP Messages: Empty 982
- Transmit GARP Messages: Empty 982
- SHOW GVRP TIMER 983
- MAC Address-based VLANs 985
- VLANs that Span 989
- Switches 989
- General Steps 992
- Removing MAC Addresses 995
- Displaying VLANs 997
- Chapter 65 1001
- macaddress 1003
- SHOW VLAN MACADDRESS 1006
- VLAN MACADDRESS 1008
- Sales and the VID 3: 1009
- Private Port VLANs 1015
- Overview 1016
- Private VLAN 1017
- Functionality 1017
- Guidelines 1018
- Creating Private VLANs 1019
- Adding Host and Uplink Ports 1020
- Deleting VLANs 1021
- Displaying Private VLANs 1022
- Private Port VLAN Commands 1023
- PRIVATE-VLAN 1025
- SHOW VLAN PRIVATE-VLAN 1026
- Voice VLAN Commands 1029
- NO SWITCHPORT VOICE VLAN 1030
- SWITCHPORT VOICE DSCP 1031
- SWITCHPORT VOICE VLAN 1032
- Confirmation Command 1033
- Port Security 1035
- Chapter 69 1037
- Configuring Ports 1040
- Displaying Port Settings 1044
- INTERFACE Command 1045
- Commands 1047
- NO SWITCHPORT PORT-SECURITY 1048
- SHOW PORT-SECURITY INTERFACE 1050
- SWITCHPORT PORT-SECURITY 1055
- Chapter 71 1061
- Authentication Process 1063
- Port Roles 1064
- Single-host mode 1068
- Multi-host mode 1068
- Multi-supplicant mode 1068
- Multi-Supplicant 1070
- Supplicant VLAN 1074
- Attributes on the 1074
- RADIUS Server 1074
- Guest VLAN 1075
- Configuring the 1080
- Operating Modes 1080
- Configuring Reauthentication 1082
- Configuring Supplicant Ports 1084
- Removing Ports 1086
- Supplicant Role 1086
- Control Commands 1091
- AUTH DYNAMIC-VLAN-CREATION 1096
- AUTH GUEST-VLAN 1098
- AUTH HOST-MODE 1099
- AUTH REAUTHENTICATION 1101
- AUTH TIMEOUT QUIET-PERIOD 1102
- AUTH TIMEOUT REAUTH-PERIOD 1103
- AUTH TIMEOUT SERVER-TIMEOUT 1104
- AUTH TIMEOUT SUPP-TIMEOUT 1105
- AUTH-MAC ENABLE 1106
- AUTH-MAC REAUTH-RELEARNING 1107
- DOT1X CONTROL-DIRECTION 1108
- DOT1X EAP 1110
- DOT1X INITIALIZE INTERFACE 1112
- DOT1X MAX-REAUTH-REQ 1113
- DOT1X PORT-CONTROL AUTO 1114
- DOT1X PORT-CONTROL SUPPLICANT 1117
- DOT1X TIMEOUT TX-PERIOD 1123
- NO AUTH DYNAMIC-VLAN-CREATION 1125
- NO AUTH GUEST-VLAN 1126
- NO AUTH REAUTHENTICATION 1127
- NO AUTH-MAC ENABLE 1128
- NO DOT1X PORT-CONTROL 1129
- SHOW AUTH-MAC INTERFACE 1131
- SHOW DOT1X 1135
- SHOW DOT1X INTERFACE 1136
- Section X 1141
- SNMPv1 and SNMPv2c 1143
- Enabling SNMPv1 and SNMPv2c 1146
- Creating Community Strings 1147
- Deleting Community Strings 1150
- Disabling SNMPv1 and SNMPv2c 1151
- Displaying SNMPv1 and SNMPv2c 1152
- Exec mode: 1153
- SNMPv1 and SNMPv2c Commands 1155
- NO SNMP-SERVER 1157
- NO SNMP-SERVER COMMUNITY 1158
- NO SNMP-SERVER ENABLE TRAP 1159
- Global Configuration mode 1160
- NO SNMP-SERVER HOST 1161
- NO SNMP-SERVER VIEW 1163
- NO SNMP TRAP LINK-STATUS 1164
- SHOW RUNNING-CONFIG SNMP 1165
- SHOW SNMP-SERVER 1166
- SHOW SNMP-SERVER COMMUNITY 1167
- SHOW SNMP-SERVER VIEW 1169
- SNMP-SERVER 1170
- SNMP-SERVER COMMUNITY 1171
- SNMP-SERVER ENABLE TRAP 1172
- SNMP-SERVER ENABLE TRAP AUTH 1173
- SNMP-SERVER HOST 1174
- SNMP-SERVER VIEW 1176
- SNMP TRAP LINK-STATUS 1178
- SNMPv3 Commands 1179
- Chapter 75: SNMPv3 Commands 1180
- NO SNMP-SERVER ENGINEID LOCAL 1182
- NO SNMP-SERVER GROUP 1183
- NO SNMP-SERVER USER 1186
- SHOW SNMP-SERVER GROUP 1189
- SHOW SNMP-SERVER HOST 1190
- SHOW SNMP-SERVER USER 1191
- SNMP-SERVER ENGINEID LOCAL 1194
- SNMP-SERVER GROUP 1195
- SNMP-SERVER USER 1199
- Network Management 1203
- Chapter 76 1205
- Configuring the sFlow Agent 1208
- Configuring the Ports 1209
- Polling Interval 1210
- Enabling the sFlow Agent 1211
- Disabling the sFlow Agent 1212
- Displaying the sFlow Agent 1213
- Configuration Example 1214
- Chapter 76: sFlow Agent 1216
- Chapter 77 1217
- NO SFLOW COLLECTOR IP 1218
- NO SFLOW ENABLE 1219
- SFLOW COLLECTOR IP 1220
- SFLOW ENABLE 1221
- SFLOW POLLING-INTERVAL 1222
- SFLOW SAMPLING-RATE 1224
- SHOW SFLOW 1226
- LLDP and LLDP-MED 1229
- Mandatory 1231
- LLDP TLVs 1231
- Optional LLDP 1231
- MED TLVs 1233
- Chapter 78: LLDP and LLDP-MED 1236
- port-description 1238
- link-aggregation 1238
- mac-phy-config 1238
- Capabilities 1240
- Network-policy 1240
- Use the SHOW LLDP 1241
- INTERFACE command to confirm 1241
- Removing LLDP TLVs from Ports 1251
- Displaying Port TLVs 1259
- LLDP and LLDP-MED Commands 1261
- CLEAR LLDP STATISTICS 1264
- CLEAR LLDP TABLE 1265
- LLDP HOLDTIME-MULTIPLIER 1266
- LLDP LOCATION 1267
- LLDP MANAGEMENT-ADDRESS 1269
- LLDP MED-NOTIFICATIONS 1271
- LLDP MED-TLV-SELECT 1272
- LLDP NOTIFICATIONS 1275
- LLDP NOTIFICATION-INTERVAL 1276
- LLDP REINIT 1277
- LLDP RUN 1278
- LLDP TIMER 1279
- LLDP TLV-SELECT 1280
- LLDP TRANSMIT RECEIVE 1283
- LLDP TX-DELAY 1284
- LOCATION CIVIC-LOCATION 1285
- LOCATION COORD-LOCATION 1288
- LOCATION ELIN-LOCATION 1291
- NO LLDP MED-NOTIFICATIONS 1292
- NO LLDP MED-TLV-SELECT 1293
- NO LLDP NOTIFICATIONS 1295
- NO LLDP RUN 1296
- NO LLDP TLV-SELECT 1297
- NO LLDP TRANSMIT RECEIVE 1298
- NO LOCATION 1299
- SHOW LLDP 1301
- SHOW LLDP INTERFACE 1303
- SHOW LLDP NEIGHBORS DETAIL 1307
- Voice VLAN ID 1310
- SHOW LLDP NEIGHBORS INTERFACE 1312
- SHOW LLDP STATISTICS 1314
- SHOW LOCATION 1318
- Chapter 80 1321
- Adding Static ARP Entries 1323
- Displaying the ARP Table 1325
- CLEAR ARP-CACHE 1330
- NO ARP (IP ADDRESS) 1331
- SHOW ARP 1332
- Chapter 82 1335
- RMON Port Statistics 1337
- Viewing Statistics 1338
- Deleting Statistics 1338
- RMON Histories 1339
- Displaying 1340
- History Groups 1340
- Deleting History 1341
- RMON Alarms 1342
- Creating RMON 1343
- Statistics Groups 1343
- Creating an 1345
- Alarm - Example 1345
- Enter_log_message 1346
- Chapter 82: RMON 1348
- Phase 3: Creating the Event 1349
- Phase 4: Creating the Alarm 1349
- Use the SHOW RMON ALARM 1350
- RMON Commands 1351
- Chapter 83: RMON Commands 1352
- NO RMON ALARM 1353
- NO RMON COLLECTION HISTORY 1354
- NO RMON COLLECTION STATS 1355
- NO RMON EVENT 1356
- RMON ALARM 1357
- RMON COLLECTION HISTORY 1360
- RMON COLLECTION STATS 1362
- RMON EVENT LOG 1363
- RMON EVENT LOG TRAP 1364
- RMON EVENT TRAP 1366
- SHOW RMON ALARM 1368
- SHOW RMON EVENT 1370
- SHOW RMON HISTORY 1372
- SHOW RMON STATISTICS 1374
- Management Security 1375
- Local Manager Accounts 1377
- Password 1379
- Encryption 1379
- Configuration 1387
- Chapter 85 1389
- ENABLE PASSWORD 1390
- NO ENABLE PASSWORD 1392
- NO USERNAME 1394
- SERVICE PASSWORD-ENCRYPTION 1395
- USERNAME 1396
- Telnet Server 1399
- Enabling the Telnet Server 1401
- Disabling the Telnet Server 1402
- Displaying the Telnet Server 1403
- Chapter 86: Telnet Server 1404
- Telnet Server Commands 1405
- NO SERVICE TELNET 1406
- SERVICE TELNET 1407
- SHOW TELNET 1408
- Telnet Client 1409
- Chapter 88: Telnet Client 1412
- Telnet Client Commands 1413
- TELNET IPV6 1415
- Secure Shell (SSH) Server 1417
- Support for SSH 1419
- SSH and Enhanced Stacking 1421
- Enabling the SSH Server 1424
- Disabling the SSH Server 1425
- Deleting Encryption Keys 1426
- Displaying the SSH Server 1427
- SSH Server Commands 1429
- CRYPTO KEY DESTROY HOSTKEY 1430
- CRYPTO KEY GENERATE HOSTKEY 1432
- NO SERVICE SSH 1434
- SERVICE SSH 1435
- SHOW CRYPTO KEY HOSTKEY 1436
- SHOW SSH SERVER 1437
- Chapter 92 1439
- HTTP server enabled. Port 80 1444
- SERVICE HTTP 1446
- IP HTTP PORT 1447
- NO SERVICE HTTP 1448
- SHOW IP HTTP 1449
- Chapter 94 1451
- Distinguished 1453
- generate 1455
- CRYPTO CERTIFICATE DESTROY 1466
- CRYPTO CERTIFICATE GENERATE 1467
- CRYPTO CERTIFICATE IMPORT 1470
- CRYPTO CERTIFICATE REQUEST 1471
- SERVICE HTTPS 1473
- IP HTTPS CERTIFICATE 1474
- NO SERVICE HTTPS 1475
- SHOW CRYPTO CERTIFICATE 1476
- SHOW IP HTTPS 1477
- RADIUS and TACACS+ Clients 1479
- Remote Manager Accounts 1481
- Managing the RADIUS Client 1484
- Specifying a 1485
- RADIUS Global 1485
- Encryption Key 1485
- Specifying the 1485
- Server Timeout 1485
- Deleting Server 1487
- IP Addresses 1487
- Displaying the 1487
- RADIUS Client 1487
- Managing the TACACS+ Client 1488
- RADIUS and TACACS+ Client 1495
- AAA ACCOUNTING LOGIN 1497
- Confirmation Commands 1498
- tacacs [ 1499
- AAA AUTHENTICATION LOGIN 1501
- IP RADIUS SOURCE-INTERFACE 1503
- LOGIN AUTHENTICATION 1505
- NO LOGIN AUTHENTICATION 1507
- NO RADIUS-SERVER HOST 1508
- NO TACACS-SERVER HOST 1509
- RADIUS-SERVER HOST 1510
- RADIUS-SERVER KEY 1512
- RADIUS-SERVER TIMEOUT 1513
- SHOW RADIUS 1514
- Parameter Description 1515
- SHOW TACACS 1516
- TACACS-SERVER HOST 1518
- TACACS-SERVER KEY 1519
- TACACS-SERVER TIMEOUT 1520
- Quality of Service 1521
- Chapter 98 1523
- Creating ACLs 1527
- Creating 1539
- Numbered MAC 1539
- Creating Named 1541
- IPv4 Address 1541
- IPv6 Address 1543
- Assigning ACLs to Ports 1545
- Assigning MAC 1546
- Address ACLs to 1546
- Assigning Named 1547
- IPv4 ACLs 1547
- IPv6 ACLs 1548
- Removing ACLs from Ports 1549
- Removing Named 1550
- Deleting ACLs from the Switch 1552
- Setting ACL Time Ranges 1555
- Displaying the ACLs 1557
- ACL Commands 1561
- Chapter 99: ACL Commands 1562
- ABSOLUTE START 1564
- ACCESS-CLASS 1566
- ACCESS-GROUP 1568
- ACCESS-LIST (MAC Address) 1570
- ACCESS-LIST ICMP 1573
- ACCESS-LIST IP 1576
- ACCESS-LIST PROTO 1580
- ACCESS-LIST TCP 1585
- ACCESS-LIST UDP 1589
- IP ACCESS-LIST 1593
- IP ACCESS-LIST (ICMP) 1594
- IP ACCESS-LIST (IP) 1597
- IP ACCESS-LIST (MAC) 1600
- IP ACCESS-LIST (PROTO) 1603
- IP ACCESS-LIST (TCP) 1606
- IP ACCESS-LIST (UDP) 1610
- IPV6 ACCESS-LIST 1614
- IPV6 ACCESS-LIST (ICMP) 1615
- IPV6 ACCESS-LIST (IP) 1618
- IPV6 ACCESS-LIST (PROTO) 1621
- IPV6 ACCESS-LIST (TCP) 1624
- IPV6 ACCESS-LIST (UDP) 1628
- IPV6 TRAFFIC-FILTER 1632
- MAC ACCESS-GROUP 1633
- NO ACCESS-LIST 1634
- NO ACCESS-GROUP 1635
- NO MAC ACCESS-GROUP 1636
- PERIODIC 1637
- PERIODIC (DAILY) 1639
- 5 pm Friday evening: 1640
- 6 pm Sunday evening: 1640
- SHOW ACCESS-LIST 1641
- SHOW INTERFACE ACCESS-GROUP 1643
- SHOW IPV6 ACCESS-LIST 1644
- SHOW TIME-RANGE 1645
- TIME-RANGE 1646
- Quality of Service (QoS) 1647
- Peak Information Rate (PIR) 1649
- Peak Burst Size (PBS) 1649
- Enabling QoS on the Switch 1650
- Creating a Class Map 1651
- Filtering 1652
- Procedures 1652
- Adding a VLAN to a Class Map 1657
- Creating a Policy Map 1658
- Deny unspecified traffic 1660
- Prioritizing CoS and DSCP 1661
- Creating a Twin-rate Policer 1664
- Creating an Aggregate Policer 1666
- Command Description 1668
- Configuring the Egress Queues 1669
- Determining the 1670
- Egress Queues 1670
- Egress Queue 1674
- <0-15> 1675
- Auto-QoS Macro 1678
- Auto-QoS Functionality 1681
- Auto-QoS-MED 1683
- Macro Examples 1683
- Support 1685
- Displaying QoS Settings 1690
- Displaying QoS 1691
- Displaying a 1691
- Class Map 1691
- Displaying CoS to 1693
- Queue Mappings 1693
- Displaying DSCP 1694
- Mappings 1694
- <0-63> 1696
- QoS Commands 1697
- Chapter 101: QoS Commands 1698
- AUTO-QOS 1701
- AUTO-QOS-MED 1703
- CLASS-MAP 1707
- DEFAULT-ACTION 1708
- DESCRIPTION (Policy Map) 1710
- MATCH ACCESS-GROUP 1712
- MATCH COS 1715
- MATCH DSCP 1717
- MATCH IP-PRECEDENCE 1718
- MATCH MAC-TYPE 1719
- MATCH PROTOCOL 1721
- ARP to it: 1725
- MATCH TCP-FLAGS 1726
- MATCH VLAN 1728
- MLS QOS COS 1735
- MLS QOS ENABLE 1737
- MLS QOS MAP COS-QUEUE 1738
- MLS QOS MAP DSCP-QUEUE 1740
- MLS QOS MAP POLICED-DSCP 1742
- <VLANID> 1744
- NO MATCH ACCESS-GROUP 1746
- NO MATCH PROTOCOL 1748
- NO MLS QOS AGGREGATE-POLICE 1750
- NO MLS QOS ENABLE 1751
- NO POLICE AGGREGATE 1752
- POLICE AGGREGATE 1753
- POLICE SINGLE-RATE ACTION 1755
- POLICE TWIN-RATE ACTION 1757
- minimum burst size 1758
- maximum rate 1758
- maximum burst size 1758
- POLICY-MAP 1759
- <0-7> 1760
- SET DSCP 1762
- SET QUEUE 1763
- SERVICE-POLICY INPUT 1765
- SHOW CLASS-MAP 1766
- SHOW POLICY-MAP 1767
- SHOW MLS QOS 1769
- SHOW MLS QOS INTERFACE 1772
- (continued) 1773
- SHOW MLS QOS MAPS COS-QUEUE 1775
- SHOW MLS QOS MAPS DSCP-QUEUE 1776
- MAP DSCP-QUEUE” on page 1740 1777
- TRUST DSCP 1780
- [0 1782
- WRR-QUEUE WEIGHT 1784
- QoS Storm Control Protection 1787
- <1 - 86400> 1789
- <1 - 10000000> 1789
- <100 - 6000> 1790
- Enabling Policy-Based QSP 1791
- Disabling a 1792
- Shutting Down a 1794
- Displaying Port Storm Status 1797
- QSP Commands 1799
- STORM-ACTION 1802
- “cmap2:” 1803
- STORM-DOWNTIME 1804
- STORM-PROTECTION 1805
- STORM-RATE 1806
- STORM-WINDOW 1808
- “cmap5:' 1809
- Chapter 103: QSP Commands 1810
- Section XIV 1811
- Chapter 104 1813
- Routing Interfaces 1815
- Static Routes 1816
- Default Route 1819
- Routing Table 1820
- 1024 static entries 1821
- 1024 dynamic entries 1821
- Creating the 1825
- Interfaces 1826
- Adding Static and 1828
- Default Routes 1828
- IPv4 Routing Commands 1833
- IP ADDRESS 1835
- IP ADDRESS DHCP 1837
- IP ROUTE 1838
- NO IP ADDRESS 1841
- NO IP ADDRESS DHCP 1843
- NO IP ROUTE 1845
- SHOW IP INTERFACE 1847
- SHOW IP ROUTE 1849
- Chapter 106 1851
- Enabling RIP 1853
- Specifying a RIP Version 1855
- Enabling Authentication 1856
- S1> enable 1858
- S1# configure terminal 1858
- S1(config)# router rip 1858
- S1(config-if)# auto-summary 1859
- Advertising the Default Route 1861
- RIP command 1862
- Adjusting Timers 1863
- AUTO-SUMMARY 1868
- DEFAULT-INFORMATION ORIGINATE 1869
- IP RIP AUTHENTICATION STRING 1870
- IP RIP AUTHENTICATION MODE 1871
- IP RIP RECEIVE-PACKET 1872
- IP RIP RECEIVE VERSION 1873
- IP RIP SEND-PACKET 1875
- IP RIP SEND VERSION 1876
- IP RIP SPLIT-HORIZON 1877
- NO AUTO-SUMMARY 1881
- NO IP RIP AUTHENTICATION MODE 1883
- NO IP RIP RECEIVE-PACKET 1885
- NO IP RIP RECEIVE VERSION 1886
- NO IP RIP SEND-PACKET 1887
- NO IP RIP SEND VERSION 1888
- NO IP RIP SPLIT-HORIZON 1889
- NO NETWORK 1890
- NO PASSIVE-INTERFACE 1891
- NO ROUTER RIP 1892
- NO TIMERS BASIC 1893
- NO VERSION 1894
- PASSIVE-INTERFACE 1895
- ROUTER RIP 1896
- SHOW IP RIP 1897
- SHOW IP RIP COUNTER 1899
- SHOW IP RIP INTERFACE 1901
- TIMERS BASIC 1903
- System Monitoring Commands 1907
- SHOW CPU 1908
- SHOW CPU HISTORY 1909
- SHOW CPU USER-THREADS 1910
- SHOW MEMORY 1911
- SHOW MEMORY ALLOCATION 1912
- SHOW MEMORY HISTORY 1913
- SHOW MEMORY POOLS 1914
- SHOW PROCESS 1915
- SHOW SYSTEM INTERRUPTS 1917
- SHOW TECH-SUPPORT 1918
- Appendix B 1921
- “VLANs” on page 1952 1922
- “Web Server” on page 1953 1922
- Boot Configuration File 1923
- Class of Service 1924
- Console Port 1925
- DHCP Relay 1926
- Enhanced Stacking 1929
- Hardware Stacking 1931
- IGMP Snooping 1932
- IGMP Snooping Querier 1933
- MAC Address Table 1936
- Management IP Address 1937
- Manager Account 1938
- Port Settings 1939
- Secure Shell Server 1943
- SNMP Status Disabled 1945
- Simple Network Time Protocol 1946
- Multiple 1948
- Spanning Tree 1948
- Protocol 1948
- System Name 1949
- TACACS+ Client 1950
- Web Server 1953
- Command Index 1955
Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-8100 Series
Hardware De La Computadora Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario
(397 paginas)
(397 paginas)
Hardware De La Computadora Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario
(402 paginas)
(402 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales