Allied-telesis AT-8100 Series Manual de usuario Pagina 175
- Pagina / 196
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AT-8100 Switch Command Line User’s Guide
175
SHOW USERS
Syntax
show users
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the managers who are currently managing
the switch locally through the Console port and remotely from Telnet and
SSH sessions. This command does not display managers who are
configuring the device with a web browser application or an SNMP
application. Figure 44 displays an example of the information.
Figure 44. SHOW USERS Command
The columns are described in Table 10.
Table 10. SHOW USERS Command
Parameter Description
Line The active management sessions. The
possible designators are “con0” for a local
management session and “vty” for remote
Telnet and SSH sessions.
User The login user name of the manager
account.
Host(s) This field is not applicable to the switch.
LineUserHost(s)IdleLocationPriv
con0manageridle00:00:00ttyS015
vty0Cassandraidle00:03:11149.112.167.2915
- AT-8100 Series 1
- Copyright 2
- Contents 10
- Document Conventions 48
- Contacting Allied Telesis 50
- Getting Started 51
- AlliedWare Plus Command Line 53
- Interface 53
- Management Sessions 54
- Remote Telnet Management 55
- Web Browser Windows 55
- Management Interfaces 57
- Local Manager Account 58
- AlliedWare Plus Command Modes 59
- Moving Down the Hierarchy 62
- Moving Up the Hierarchy 67
- DISABLE command 68
- Port Numbers in Commands 69
- Command Format 71
- Startup Messages 72
- Starting a Management Session 75
- What to Configure First 80
- Changing the 81
- Login Password 81
- Assigning a Name 81
- Adding a 82
- Management IP 82
- Saving Your 84
- Ending a Management Session 85
- Basic Command Line Management 87
- Clearing the Screen 88
- Displaying the On-line Help 89
- ? (Question Mark Key) 95
- CLEAR SCREEN 97
- CONFIGURE TERMINAL 98
- Parameters 100
- Description 100
- Parameter 101
- Examples 102
- Chapter 5 111
- Controlling Eco-Mode LED 114
- Temperature and Fan Control 115
- ECOFRIENDLY LED 116
- NO ECOFRIENDLY LED 117
- SHOW ECOFRIENDLY 118
- SHOW SYSTEM ENVIRONMENT 119
- Basic Operations 123
- Basic Switch Management 125
- Adding a Name to the Switch 126
- Contact: JordanB 127
- Displaying Parameter Settings 128
- Pinging Network Devices 130
- Resetting the Switch 131
- filename2 133
- “SHOW BAUD-RATE” on page 168 135
- Configuring the Banners 139
- Chapter 8 143
- BANNER EXEC 145
- BANNER LOGIN 147
- BANNER MOTD 149
- BAUD-RATE SET 151
- CLOCK SET 152
- ERASE STARTUP-CONFIG 153
- EXEC-TIMEOUT 154
- HOSTNAME 157
- LINE CONSOLE 158
- LINE VTY 159
- NO HOSTNAME 160
- PING IPv6 163
- SERVICE MAXMANAGER 166
- SHOW BANNER LOGIN 167
- SHOW BAUD-RATE 168
- SHOW CLOCK 169
- SHOW RUNNING-CONFIG 170
- SHOW SWITCH 171
- SHOW SYSTEM 173
- SHOW SYSTEM SERIALNUMBER 174
- SHOW USERS 175
- SHOW VERSION 177
- SNMP-SERVER CONTACT 178
- SNMP-SERVER LOCATION 179
- SYSTEM TERRITORY 180
- Port Parameters 183
- Adding Descriptions 184
- Chapter 9: Port Parameters 186
- Enabling or Disabling Ports 188
- Resetting Ports 193
- Displaying Port 200
- Displaying SFP Information 202
- Port Parameter Commands 203
- Command Mode Description 205
- BACKPRESSURE 206
- CLEAR PORT COUNTER 209
- DESCRIPTION 210
- EGRESS-RATE-LIMIT 214
- FCTRLLIMIT 215
- FLOWCONTROL 216
- HOLBPLIMIT 219
- NO EGRESS-RATE-LIMIT 222
- NO FLOWCONTROL 223
- NO SHUTDOWN 224
- NO STORM-CONTROL 226
- POLARITY 227
- RENEGOTIATE 230
- SHOW FLOWCONTROL INTERFACE 232
- SHOW INTERFACE 234
- Interface Port number 235
- SHOW INTERFACE BRIEF 238
- SHOW INTERFACE STATUS 240
- SHOW RUNNING-CONFIG INTERFACE 245
- SHOW STORM-CONTROL 246
- SHOW SYSTEM PLUGGABLE 248
- SHOW SYSTEM PLUGGABLE DETAIL 249
- SHUTDOWN 250
- STORM-CONTROL 254
- Power Over Ethernet 257
- Prioritization 259
- Enabling and Disabling PoE 260
- Prioritizing Ports 263
- Managing Legacy PDs 265
- Monitoring Power Consumption 266
- Displaying PoE Information 267
- Power Over Ethernet Commands 269
- NO POWER-INLINE ALLOW-LEGACY 272
- NO POWER-INLINE DESCRIPTION 273
- NO POWER-INLINE ENABLE 274
- NO POWER-INLINE MAX 275
- NO POWER-INLINE PRIORITY 276
- NO SERVICE POWER-INLINE 278
- POWER-INLINE ALLOW-LEGACY 280
- POWER-INLINE DESCRIPTION 281
- POWER-INLINE ENABLE 282
- POWER-INLINE MAX 283
- POWER-INLINE PRIORITY 284
- POWER-INLINE USAGE-THRESHOLD 286
- SERVICE POWER-INLINE 287
- SHOW POWER-INLINE 288
- SHOW POWER-INLINE INTERFACE 293
- Chapter 13 299
- Adding an IPv4 303
- Management 303
- Default Gateway 305
- Deleting an IPv4 306
- Address and 306
- Displaying an 307
- Adding an IPv6 308
- Deleting an IPv6 310
- CLEAR IPV6 NEIGHBORS 315
- 143.87.132.45: 321
- IPV6 ADDRESS 322
- IPV6 ROUTE 324
- 45ab:672:934c::78:17cb: 325
- NO IPV6 ADDRESS 329
- NO IPV6 ROUTE 330
- SHOW IPV6 INTERFACE 335
- SHOW IPV6 ROUTE 336
- Chapter 15 337
- SNTP Server 339
- Disabling the SNTP Client 342
- Displaying the SNTP Client 343
- Displaying the Date and Time 344
- SNTP Client Commands 345
- CLOCK SUMMER-TIME 346
- CLOCK TIMEZONE 347
- NO CLOCK SUMMER-TIME 348
- NO NTP PEER 349
- NTP PEER 350
- PURGE NTP 351
- SHOW NTP ASSOCIATIONS 353
- SHOW NTP STATUS 355
- Domain Name System (DNS) 357
- IP NAME-SERVER 366
- IP DOMAIN-NAME 368
- IP DOMAIN-LIST 369
- IP DOMAIN-LOOKUP 371
- SHOW IP NAME-SERVER 372
- SHOW IP DOMAIN-NAME 373
- SHOW HOSTS 374
- Adding Static MAC Addresses 378
- Deleting MAC Addresses 380
- Setting the Aging Timer 382
- Chapter 19: MAC Address Table 384
- MAC Address Table Commands 385
- CLEAR MAC ADDRESS-TABLE 386
- MAC ADDRESS-TABLE AGEING-TIME 388
- MAC ADDRESS-TABLE STATIC 390
- NO MAC ADDRESS-TABLE STATIC 392
- SHOW MAC ADDRESS-TABLE 394
- Active Boot 400
- Initialization 401
- Processes 401
- Chapter 21: Hardware Stacking 406
- Stacking Commands 409
- SHOW STACK 410
- renumber 411
- Chapter 22: Stacking Commands 412
- Chapter 23: Enhanced Stacking 416
- Save the configuration 419
- Configuring a Member Switch 420
- Member Switches 426
- Disabling Enhanced Stacking 435
- Enhanced Stacking Commands 437
- ESTACK COMMAND-SWITCH 439
- ESTACK RUN 440
- NO ESTACK COMMAND-SWITCH 441
- NO ESTACK RUN 442
- RCOMMAND 443
- REBOOT ESTACK MEMBER 444
- SHOW ESTACK 446
- SHOW ESTACK COMMAND-SWITCH 448
- SHOW ESTACK REMOTELIST 449
- UPLOAD CONFIG REMOTELIST 451
- UPLOAD IMAGE REMOTELIST 452
- Link-flap Protection 455
- Configuring the Feature 458
- Link-flap Protection Commands 459
- LINK-FLAP DURATION 460
- LINK-FLAP PROTECTION 461
- LINK-FLAP RATE 462
- NO LINK-FLAP PROTECTION 463
- SHOW LINK-FLAP 464
- Port Mirror 465
- Chapter 27: Port Mirror 468
- Displaying the Port Mirror 471
- Port Mirror Commands 473
- MIRROR INTERFACE 475
- NO MIRROR INTERFACE 477
- SHOW MIRROR 478
- DHCP Relay Overview 481
- Agent Option 82 483
- Client Requests 484
- Message Length 485
- Adding the IP 486
- Addresses of the 486
- DHCP Servers 486
- Adding DHCP 487
- Relay to the 487
- Option 82 489
- DHCP Relay Commands 493
- IP DHCP-RELAY 495
- IP DHCP-RELAY AGENT-OPTION 496
- IP DHCP-RELAY MAXHOPS 501
- IP DHCP-RELAY SERVER-ADDRESS 502
- NO IP DHCP-RELAY 503
- NO IP DHCP-RELAY AGENT-OPTION 504
- 214.154.35.78 506
- NO SERVICE DHCP-RELAY 507
- SERVICE DHCP-RELAY 508
- SHOW IP DHCP-RELAY 509
- Group Link Control 511
- Configuration Examples 521
- Group Link Control Commands 525
- GROUP-LINK-CONTROL 526
- GROUP-LINK-CONTROL DOWNSTREAM 527
- GROUP-LINK-CONTROL UPSTREAM 529
- NO GROUP-LINK-CONTROL 530
- SHOW GROUP-LINK-CONTROL 533
- Multicast Commands 535
- File System 541
- destinationfile 545
- Chapter 34: File System 548
- File System Commands 551
- DELETE FORCE 554
- SHOW FILE SYSTEMS 557
- Boot Configuration Files 559
- Chapter 37 565
- BOOT CONFIG-FILE 566
- COPY RUNNING-CONFIG 568
- NO BOOT CONFIG-FILE 571
- SHOW BOOT 572
- SHOW STARTUP-CONFIG 574
- File Transfer 577
- Downloading 579
- Software with 579
- Files to the 580
- Switch with 580
- Uploading Files 581
- 20100601091645.txt 582
- Waiting to send 585
- Chapter 38: File Transfer 586
- File Transfer Commands 589
- COPY FILENAME ZMODEM 590
- COPY FLASH TFTP 591
- COPY TFTP FLASH 592
- COPY ZMODEM 594
- Snooping 597
- (IGMP) Snooping 599
- Host Node Topology 602
- Enabling IGMP Snooping 603
- Disabling IGMP Snooping 606
- Displaying IGMP Snooping 607
- IGMP Snooping Commands 609
- CLEAR IP IGMP 610
- IP IGMP LIMIT 611
- IP IGMP QUERIER-TIMEOUT 612
- IP IGMP SNOOPING 613
- IP IGMP SNOOPING MROUTER 616
- IP IGMP STATUS 617
- NO IP IGMP SNOOPING 618
- NO IP IGMP SNOOPING MROUTER 619
- SHOW IP IGMP SNOOPING 620
- Assigning 625
- Multiple Queriers 625
- .2 Enabled Enabled Active 626
- .3 Enabled Disabled None 627
- .4 Enabled Enabled Standby 627
- Configuring 630
- Chapter 43 633
- IP IGMP QUERY-INTERVAL 634
- IP IGMP SNOOPING QUERIER 635
- NO IP IGMP SNOOPING QUERIER 636
- SHOW IP IGMP INTERFACE 637
- DHCP Snooping Commands 639
- ARP SECURITY 641
- ARP SECURITY VIOLATION 642
- CLEAR ARP SECURITY STATISTICS 644
- IP DHCP SNOOPING 648
- IP DHCP SNOOPING AGENT-OPTION 649
- IP DHCP SNOOPING BINDING 651
- IP DHCP SNOOPING MAX-BINDINGS 655
- IP DHCP SNOOPING TRUST 659
- IP DHCP VERIFY MAC-ADDRESS 660
- IP DHCP SNOOPING VIOLATION 662
- IP SOURCE BINDING 664
- SERVICE DHCP SNOOPING 666
- SHOW ARP SECURITY 668
- SHOW ARP SECURITY INTERFACE 670
- SHOW ARP SECURITY STATISTICS 672
- SHOW IP DHCP SNOOPING 674
- SHOW IP DHCP SNOOPING BINDING 676
- SHOW IP SOURCE BINDING 680
- Event Messages 683
- Event Log 685
- Displaying the Event Log 687
- Clearing the Event Log 688
- Event Log Commands 689
- CLEAR LOG 691
- CLEAR LOG BUFFERED 692
- CLEAR LOG PERMANENT 693
- LOG BUFFERED 694
- LOG CONSOLE 696
- LOG PERMANENT 698
- NO LOG BUFFERED 699
- OUtputID Type Status Details 700
- NO LOG CONSOLE 701
- NO LOG PERMANENT 702
- SHOW LOG 704
- SHOW LOG CONFIG 707
- SHOW LOG PERMANENT 709
- SHOW LOG PERMANENT TAIL 710
- SHOW LOG REVERSE 711
- SHOW LOG TAIL 712
- Syslog Client 713
- program 715
- Chapter 47: Syslog Client 716
- Syslog Client Commands 721
- LOG HOST 722
- NO LOG HOST 724
- Port Trunks 727
- Static Port Trunks 729
- Source IP Address (Layer 3) 731
- Displaying Static Port Trunks 737
- Static Port Trunk Commands 739
- NO STATIC-CHANNEL-GROUP 740
- PORT-CHANNEL LOAD-BALANCE 741
- SHOW STATIC-CHANNEL-GROUP 743
- STATIC-CHANNEL-GROUP 744
- Chapter 51 747
- Load Distribution 749
- Creating New Aggregators 751
- Adding Ports to Aggregators 753
- Deleting Aggregators 755
- Displaying Aggregators 756
- LACP Commands 759
- CHANNEL-GROUP 760
- LACP SYSTEM-PRIORITY 762
- NO CHANNEL-GROUP 763
- SHOW ETHERCHANNEL 766
- SHOW ETHERCHANNEL DETAIL 767
- Chapter 52: LACP Commands 768
- SHOW ETHERCHANNEL SUMMARY 769
- SHOW LACP SYS-ID 770
- SHOW PORT ETHERCHANNEL 771
- Spanning Tree Protocols 773
- STP, RSTP and MSTP Protocols 775
- Path Costs and Port Costs 778
- Port Priority 779
- Point-to-Point and Edge Ports 782
- Mixed STP and RSTP Networks 785
- Spanning Tree and VLANs 786
- RSTP and MSTP BPDU Guard 787
- STP, RSTP, MSTP Loop Guard 789
- STP and RSTP Root Guard 794
- Spanning Tree Protocol (STP) 795
- Setting the Switch Parameters 798
- Setting the Port Parameters 800
- Displaying STP Settings 802
- STP Commands 803
- Chapter 55: STP Commands 804
- NO SPANNING-TREE STP ENABLE 805
- SHOW SPANNING-TREE 806
- SPANNING-TREE FORWARD-TIME 808
- SPANNING-TREE GUARD ROOT 809
- SPANNING-TREE HELLO-TIME 810
- SPANNING-TREE MAX-AGE 811
- SPANNING-TREE MODE STP 812
- SPANNING-TREE PATH-COST 813
- SPANNING-TREE PORTFAST 814
- SPANNING-TREE STP ENABLE 818
- Setting the 822
- Forward Time 822
- Hello Time, and 822
- Setting the Bridge 823
- Priority 823
- Enabling or 823
- Disabling BPDU 823
- Configuring Port 825
- Displaying RSTP Settings 830
- RSTP Commands 831
- Chapter 57: RSTP Commands 832
- NO SPANNING-TREE PORTFAST 833
- NO SPANNING-TREE LOOP-GUARD 835
- NO SPANNING-TREE RSTP ENABLE 837
- SPANNING-TREE LINK-TYPE 845
- SPANNING-TREE LOOP-GUARD 846
- SPANNING-TREE MODE RSTP 848
- SPANNING-TREE RSTP ENABLE 854
- Chapter 58 855
- MSTI Guidelines 860
- VLAN and MSTI Associations 861
- Ports in Multiple MSTIs 862
- Summary of Guidelines 868
- Associating VLANs to MSTIs 870
- MSTP Root Guard 874
- MSTP Commands 875
- Chapter 59: MSTP Commands 876
- INSTANCE MSTI-ID PRIORITY 877
- INSTANCE MSTI-ID VLAN 879
- NO SPANNING-TREE MSTP ENABLE 882
- SHOW SPANNING-TREE MST CONFIG 884
- SHOW SPANNING-TREE MST 885
- SPANNING-TREE MODE MSTP 890
- SPANNING-TREE MSTP ENABLE 891
- SPANNING-TREE MST INSTANCE 893
- <region-name> 897
- REVISION 898
- Virtual LANs 899
- Port-based and Tagged VLANs 901
- Port-based VLANs 903
- Tagged VLANs 903
- Port-based VLAN Overview 904
- Port VLAN 905
- Identifier 905
- Port-based 907
- Example 1 907
- Example 2 907
- Tagged VLAN Overview 910
- Tagged VLAN 912
- Creating VLANs 915
- Adding Tagged Ports to VLANs 918
- Displaying the VLANs 923
- Port-based and Tagged VLAN 925
- NO SWITCHPORT ACCESS VLAN 926
- NO SWITCHPORT TRUNK 927
- SHOW VLAN 930
- SWITCHPORT ACCESS VLAN 932
- SWITCHPORT MODE ACCESS 934
- SWITCHPORT MODE TRUNK 935
- SWITCHPORT TRUNK ALLOWED VLAN 937
- SWITCHPORT TRUNK NATIVE VLAN 940
- Chapter 62 945
- Figure 177. GVRP Example 947
- GVRP and Network Security 950
- Enabling GVRP on the Switch 952
- Enabling GIP on the Switch 953
- Enabling GVRP on the Ports 954
- Setting the GVRP Timers 955
- Disabling GVRP on the Ports 957
- Disabling GIP on the Switch 958
- Disabling GVRP on the Switch 959
- Displaying GVRP 961
- CONVERT DYNAMIC VLAN 965
- GVRP APPLICANT STATE ACTIVE 966
- GVRP APPLICANT STATE NORMAL 967
- GVRP ENABLE 968
- GVRP REGISTRATION 969
- GVRP TIMER JOIN 970
- GVRP TIMER LEAVE 971
- GVRP TIMER LEAVEALL 972
- NO GVRP ENABLE 973
- NO GVRP TIMER JOIN 974
- NO GVRP TIMER LEAVE 975
- NO GVRP TIMER LEAVEALL 976
- PURGE GVRP 977
- SHOW GVRP APPLICANT 978
- SHOW GVRP CONFIGURATION 979
- SHOW GVRP MACHINE 980
- SHOW GVRP STATISTICS 981
- Receive GARP Messages: Empty 982
- Transmit GARP Messages: Empty 982
- SHOW GVRP TIMER 983
- MAC Address-based VLANs 985
- VLANs that Span 989
- Switches 989
- General Steps 992
- Removing MAC Addresses 995
- Displaying VLANs 997
- Chapter 65 1001
- macaddress 1003
- SHOW VLAN MACADDRESS 1006
- VLAN MACADDRESS 1008
- Sales and the VID 3: 1009
- Private Port VLANs 1015
- Overview 1016
- Private VLAN 1017
- Functionality 1017
- Guidelines 1018
- Creating Private VLANs 1019
- Adding Host and Uplink Ports 1020
- Deleting VLANs 1021
- Displaying Private VLANs 1022
- Private Port VLAN Commands 1023
- PRIVATE-VLAN 1025
- SHOW VLAN PRIVATE-VLAN 1026
- Voice VLAN Commands 1029
- NO SWITCHPORT VOICE VLAN 1030
- SWITCHPORT VOICE DSCP 1031
- SWITCHPORT VOICE VLAN 1032
- Confirmation Command 1033
- Port Security 1035
- Chapter 69 1037
- Configuring Ports 1040
- Displaying Port Settings 1044
- INTERFACE Command 1045
- Commands 1047
- NO SWITCHPORT PORT-SECURITY 1048
- SHOW PORT-SECURITY INTERFACE 1050
- SWITCHPORT PORT-SECURITY 1055
- Chapter 71 1061
- Authentication Process 1063
- Port Roles 1064
- Single-host mode 1068
- Multi-host mode 1068
- Multi-supplicant mode 1068
- Multi-Supplicant 1070
- Supplicant VLAN 1074
- Attributes on the 1074
- RADIUS Server 1074
- Guest VLAN 1075
- Configuring the 1080
- Operating Modes 1080
- Configuring Reauthentication 1082
- Configuring Supplicant Ports 1084
- Removing Ports 1086
- Supplicant Role 1086
- Control Commands 1091
- AUTH DYNAMIC-VLAN-CREATION 1096
- AUTH GUEST-VLAN 1098
- AUTH HOST-MODE 1099
- AUTH REAUTHENTICATION 1101
- AUTH TIMEOUT QUIET-PERIOD 1102
- AUTH TIMEOUT REAUTH-PERIOD 1103
- AUTH TIMEOUT SERVER-TIMEOUT 1104
- AUTH TIMEOUT SUPP-TIMEOUT 1105
- AUTH-MAC ENABLE 1106
- AUTH-MAC REAUTH-RELEARNING 1107
- DOT1X CONTROL-DIRECTION 1108
- DOT1X EAP 1110
- DOT1X INITIALIZE INTERFACE 1112
- DOT1X MAX-REAUTH-REQ 1113
- DOT1X PORT-CONTROL AUTO 1114
- DOT1X PORT-CONTROL SUPPLICANT 1117
- DOT1X TIMEOUT TX-PERIOD 1123
- NO AUTH DYNAMIC-VLAN-CREATION 1125
- NO AUTH GUEST-VLAN 1126
- NO AUTH REAUTHENTICATION 1127
- NO AUTH-MAC ENABLE 1128
- NO DOT1X PORT-CONTROL 1129
- SHOW AUTH-MAC INTERFACE 1131
- SHOW DOT1X 1135
- SHOW DOT1X INTERFACE 1136
- Section X 1141
- SNMPv1 and SNMPv2c 1143
- Enabling SNMPv1 and SNMPv2c 1146
- Creating Community Strings 1147
- Deleting Community Strings 1150
- Disabling SNMPv1 and SNMPv2c 1151
- Displaying SNMPv1 and SNMPv2c 1152
- Exec mode: 1153
- SNMPv1 and SNMPv2c Commands 1155
- NO SNMP-SERVER 1157
- NO SNMP-SERVER COMMUNITY 1158
- NO SNMP-SERVER ENABLE TRAP 1159
- Global Configuration mode 1160
- NO SNMP-SERVER HOST 1161
- NO SNMP-SERVER VIEW 1163
- NO SNMP TRAP LINK-STATUS 1164
- SHOW RUNNING-CONFIG SNMP 1165
- SHOW SNMP-SERVER 1166
- SHOW SNMP-SERVER COMMUNITY 1167
- SHOW SNMP-SERVER VIEW 1169
- SNMP-SERVER 1170
- SNMP-SERVER COMMUNITY 1171
- SNMP-SERVER ENABLE TRAP 1172
- SNMP-SERVER ENABLE TRAP AUTH 1173
- SNMP-SERVER HOST 1174
- SNMP-SERVER VIEW 1176
- SNMP TRAP LINK-STATUS 1178
- SNMPv3 Commands 1179
- Chapter 75: SNMPv3 Commands 1180
- NO SNMP-SERVER ENGINEID LOCAL 1182
- NO SNMP-SERVER GROUP 1183
- NO SNMP-SERVER USER 1186
- SHOW SNMP-SERVER GROUP 1189
- SHOW SNMP-SERVER HOST 1190
- SHOW SNMP-SERVER USER 1191
- SNMP-SERVER ENGINEID LOCAL 1194
- SNMP-SERVER GROUP 1195
- SNMP-SERVER USER 1199
- Network Management 1203
- Chapter 76 1205
- Configuring the sFlow Agent 1208
- Configuring the Ports 1209
- Polling Interval 1210
- Enabling the sFlow Agent 1211
- Disabling the sFlow Agent 1212
- Displaying the sFlow Agent 1213
- Configuration Example 1214
- Chapter 76: sFlow Agent 1216
- Chapter 77 1217
- NO SFLOW COLLECTOR IP 1218
- NO SFLOW ENABLE 1219
- SFLOW COLLECTOR IP 1220
- SFLOW ENABLE 1221
- SFLOW POLLING-INTERVAL 1222
- SFLOW SAMPLING-RATE 1224
- SHOW SFLOW 1226
- LLDP and LLDP-MED 1229
- Mandatory 1231
- LLDP TLVs 1231
- Optional LLDP 1231
- MED TLVs 1233
- Chapter 78: LLDP and LLDP-MED 1236
- port-description 1238
- link-aggregation 1238
- mac-phy-config 1238
- Capabilities 1240
- Network-policy 1240
- Use the SHOW LLDP 1241
- INTERFACE command to confirm 1241
- Removing LLDP TLVs from Ports 1251
- Displaying Port TLVs 1259
- LLDP and LLDP-MED Commands 1261
- CLEAR LLDP STATISTICS 1264
- CLEAR LLDP TABLE 1265
- LLDP HOLDTIME-MULTIPLIER 1266
- LLDP LOCATION 1267
- LLDP MANAGEMENT-ADDRESS 1269
- LLDP MED-NOTIFICATIONS 1271
- LLDP MED-TLV-SELECT 1272
- LLDP NOTIFICATIONS 1275
- LLDP NOTIFICATION-INTERVAL 1276
- LLDP REINIT 1277
- LLDP RUN 1278
- LLDP TIMER 1279
- LLDP TLV-SELECT 1280
- LLDP TRANSMIT RECEIVE 1283
- LLDP TX-DELAY 1284
- LOCATION CIVIC-LOCATION 1285
- LOCATION COORD-LOCATION 1288
- LOCATION ELIN-LOCATION 1291
- NO LLDP MED-NOTIFICATIONS 1292
- NO LLDP MED-TLV-SELECT 1293
- NO LLDP NOTIFICATIONS 1295
- NO LLDP RUN 1296
- NO LLDP TLV-SELECT 1297
- NO LLDP TRANSMIT RECEIVE 1298
- NO LOCATION 1299
- SHOW LLDP 1301
- SHOW LLDP INTERFACE 1303
- SHOW LLDP NEIGHBORS DETAIL 1307
- Voice VLAN ID 1310
- SHOW LLDP NEIGHBORS INTERFACE 1312
- SHOW LLDP STATISTICS 1314
- SHOW LOCATION 1318
- Chapter 80 1321
- Adding Static ARP Entries 1323
- Displaying the ARP Table 1325
- CLEAR ARP-CACHE 1330
- NO ARP (IP ADDRESS) 1331
- SHOW ARP 1332
- Chapter 82 1335
- RMON Port Statistics 1337
- Viewing Statistics 1338
- Deleting Statistics 1338
- RMON Histories 1339
- Displaying 1340
- History Groups 1340
- Deleting History 1341
- RMON Alarms 1342
- Creating RMON 1343
- Statistics Groups 1343
- Creating an 1345
- Alarm - Example 1345
- Enter_log_message 1346
- Chapter 82: RMON 1348
- Phase 3: Creating the Event 1349
- Phase 4: Creating the Alarm 1349
- Use the SHOW RMON ALARM 1350
- RMON Commands 1351
- Chapter 83: RMON Commands 1352
- NO RMON ALARM 1353
- NO RMON COLLECTION HISTORY 1354
- NO RMON COLLECTION STATS 1355
- NO RMON EVENT 1356
- RMON ALARM 1357
- RMON COLLECTION HISTORY 1360
- RMON COLLECTION STATS 1362
- RMON EVENT LOG 1363
- RMON EVENT LOG TRAP 1364
- RMON EVENT TRAP 1366
- SHOW RMON ALARM 1368
- SHOW RMON EVENT 1370
- SHOW RMON HISTORY 1372
- SHOW RMON STATISTICS 1374
- Management Security 1375
- Local Manager Accounts 1377
- Password 1379
- Encryption 1379
- Configuration 1387
- Chapter 85 1389
- ENABLE PASSWORD 1390
- NO ENABLE PASSWORD 1392
- NO USERNAME 1394
- SERVICE PASSWORD-ENCRYPTION 1395
- USERNAME 1396
- Telnet Server 1399
- Enabling the Telnet Server 1401
- Disabling the Telnet Server 1402
- Displaying the Telnet Server 1403
- Chapter 86: Telnet Server 1404
- Telnet Server Commands 1405
- NO SERVICE TELNET 1406
- SERVICE TELNET 1407
- SHOW TELNET 1408
- Telnet Client 1409
- Chapter 88: Telnet Client 1412
- Telnet Client Commands 1413
- TELNET IPV6 1415
- Secure Shell (SSH) Server 1417
- Support for SSH 1419
- SSH and Enhanced Stacking 1421
- Enabling the SSH Server 1424
- Disabling the SSH Server 1425
- Deleting Encryption Keys 1426
- Displaying the SSH Server 1427
- SSH Server Commands 1429
- CRYPTO KEY DESTROY HOSTKEY 1430
- CRYPTO KEY GENERATE HOSTKEY 1432
- NO SERVICE SSH 1434
- SERVICE SSH 1435
- SHOW CRYPTO KEY HOSTKEY 1436
- SHOW SSH SERVER 1437
- Chapter 92 1439
- HTTP server enabled. Port 80 1444
- SERVICE HTTP 1446
- IP HTTP PORT 1447
- NO SERVICE HTTP 1448
- SHOW IP HTTP 1449
- Chapter 94 1451
- Distinguished 1453
- generate 1455
- CRYPTO CERTIFICATE DESTROY 1466
- CRYPTO CERTIFICATE GENERATE 1467
- CRYPTO CERTIFICATE IMPORT 1470
- CRYPTO CERTIFICATE REQUEST 1471
- SERVICE HTTPS 1473
- IP HTTPS CERTIFICATE 1474
- NO SERVICE HTTPS 1475
- SHOW CRYPTO CERTIFICATE 1476
- SHOW IP HTTPS 1477
- RADIUS and TACACS+ Clients 1479
- Remote Manager Accounts 1481
- Managing the RADIUS Client 1484
- Specifying a 1485
- RADIUS Global 1485
- Encryption Key 1485
- Specifying the 1485
- Server Timeout 1485
- Deleting Server 1487
- IP Addresses 1487
- Displaying the 1487
- RADIUS Client 1487
- Managing the TACACS+ Client 1488
- RADIUS and TACACS+ Client 1495
- AAA ACCOUNTING LOGIN 1497
- Confirmation Commands 1498
- tacacs [ 1499
- AAA AUTHENTICATION LOGIN 1501
- IP RADIUS SOURCE-INTERFACE 1503
- LOGIN AUTHENTICATION 1505
- NO LOGIN AUTHENTICATION 1507
- NO RADIUS-SERVER HOST 1508
- NO TACACS-SERVER HOST 1509
- RADIUS-SERVER HOST 1510
- RADIUS-SERVER KEY 1512
- RADIUS-SERVER TIMEOUT 1513
- SHOW RADIUS 1514
- Parameter Description 1515
- SHOW TACACS 1516
- TACACS-SERVER HOST 1518
- TACACS-SERVER KEY 1519
- TACACS-SERVER TIMEOUT 1520
- Quality of Service 1521
- Chapter 98 1523
- Creating ACLs 1527
- Creating 1539
- Numbered MAC 1539
- Creating Named 1541
- IPv4 Address 1541
- IPv6 Address 1543
- Assigning ACLs to Ports 1545
- Assigning MAC 1546
- Address ACLs to 1546
- Assigning Named 1547
- IPv4 ACLs 1547
- IPv6 ACLs 1548
- Removing ACLs from Ports 1549
- Removing Named 1550
- Deleting ACLs from the Switch 1552
- Setting ACL Time Ranges 1555
- Displaying the ACLs 1557
- ACL Commands 1561
- Chapter 99: ACL Commands 1562
- ABSOLUTE START 1564
- ACCESS-CLASS 1566
- ACCESS-GROUP 1568
- ACCESS-LIST (MAC Address) 1570
- ACCESS-LIST ICMP 1573
- ACCESS-LIST IP 1576
- ACCESS-LIST PROTO 1580
- ACCESS-LIST TCP 1585
- ACCESS-LIST UDP 1589
- IP ACCESS-LIST 1593
- IP ACCESS-LIST (ICMP) 1594
- IP ACCESS-LIST (IP) 1597
- IP ACCESS-LIST (MAC) 1600
- IP ACCESS-LIST (PROTO) 1603
- IP ACCESS-LIST (TCP) 1606
- IP ACCESS-LIST (UDP) 1610
- IPV6 ACCESS-LIST 1614
- IPV6 ACCESS-LIST (ICMP) 1615
- IPV6 ACCESS-LIST (IP) 1618
- IPV6 ACCESS-LIST (PROTO) 1621
- IPV6 ACCESS-LIST (TCP) 1624
- IPV6 ACCESS-LIST (UDP) 1628
- IPV6 TRAFFIC-FILTER 1632
- MAC ACCESS-GROUP 1633
- NO ACCESS-LIST 1634
- NO ACCESS-GROUP 1635
- NO MAC ACCESS-GROUP 1636
- PERIODIC 1637
- PERIODIC (DAILY) 1639
- 5 pm Friday evening: 1640
- 6 pm Sunday evening: 1640
- SHOW ACCESS-LIST 1641
- SHOW INTERFACE ACCESS-GROUP 1643
- SHOW IPV6 ACCESS-LIST 1644
- SHOW TIME-RANGE 1645
- TIME-RANGE 1646
- Quality of Service (QoS) 1647
- Peak Information Rate (PIR) 1649
- Peak Burst Size (PBS) 1649
- Enabling QoS on the Switch 1650
- Creating a Class Map 1651
- Filtering 1652
- Procedures 1652
- Adding a VLAN to a Class Map 1657
- Creating a Policy Map 1658
- Deny unspecified traffic 1660
- Prioritizing CoS and DSCP 1661
- Creating a Twin-rate Policer 1664
- Creating an Aggregate Policer 1666
- Command Description 1668
- Configuring the Egress Queues 1669
- Determining the 1670
- Egress Queues 1670
- Egress Queue 1674
- <0-15> 1675
- Auto-QoS Macro 1678
- Auto-QoS Functionality 1681
- Auto-QoS-MED 1683
- Macro Examples 1683
- Support 1685
- Displaying QoS Settings 1690
- Displaying QoS 1691
- Displaying a 1691
- Class Map 1691
- Displaying CoS to 1693
- Queue Mappings 1693
- Displaying DSCP 1694
- Mappings 1694
- <0-63> 1696
- QoS Commands 1697
- Chapter 101: QoS Commands 1698
- AUTO-QOS 1701
- AUTO-QOS-MED 1703
- CLASS-MAP 1707
- DEFAULT-ACTION 1708
- DESCRIPTION (Policy Map) 1710
- MATCH ACCESS-GROUP 1712
- MATCH COS 1715
- MATCH DSCP 1717
- MATCH IP-PRECEDENCE 1718
- MATCH MAC-TYPE 1719
- MATCH PROTOCOL 1721
- ARP to it: 1725
- MATCH TCP-FLAGS 1726
- MATCH VLAN 1728
- MLS QOS COS 1735
- MLS QOS ENABLE 1737
- MLS QOS MAP COS-QUEUE 1738
- MLS QOS MAP DSCP-QUEUE 1740
- MLS QOS MAP POLICED-DSCP 1742
- <VLANID> 1744
- NO MATCH ACCESS-GROUP 1746
- NO MATCH PROTOCOL 1748
- NO MLS QOS AGGREGATE-POLICE 1750
- NO MLS QOS ENABLE 1751
- NO POLICE AGGREGATE 1752
- POLICE AGGREGATE 1753
- POLICE SINGLE-RATE ACTION 1755
- POLICE TWIN-RATE ACTION 1757
- minimum burst size 1758
- maximum rate 1758
- maximum burst size 1758
- POLICY-MAP 1759
- <0-7> 1760
- SET DSCP 1762
- SET QUEUE 1763
- SERVICE-POLICY INPUT 1765
- SHOW CLASS-MAP 1766
- SHOW POLICY-MAP 1767
- SHOW MLS QOS 1769
- SHOW MLS QOS INTERFACE 1772
- (continued) 1773
- SHOW MLS QOS MAPS COS-QUEUE 1775
- SHOW MLS QOS MAPS DSCP-QUEUE 1776
- MAP DSCP-QUEUE” on page 1740 1777
- TRUST DSCP 1780
- [0 1782
- WRR-QUEUE WEIGHT 1784
- QoS Storm Control Protection 1787
- <1 - 86400> 1789
- <1 - 10000000> 1789
- <100 - 6000> 1790
- Enabling Policy-Based QSP 1791
- Disabling a 1792
- Shutting Down a 1794
- Displaying Port Storm Status 1797
- QSP Commands 1799
- STORM-ACTION 1802
- “cmap2:” 1803
- STORM-DOWNTIME 1804
- STORM-PROTECTION 1805
- STORM-RATE 1806
- STORM-WINDOW 1808
- “cmap5:' 1809
- Chapter 103: QSP Commands 1810
- Section XIV 1811
- Chapter 104 1813
- Routing Interfaces 1815
- Static Routes 1816
- Default Route 1819
- Routing Table 1820
- 1024 static entries 1821
- 1024 dynamic entries 1821
- Creating the 1825
- Interfaces 1826
- Adding Static and 1828
- Default Routes 1828
- IPv4 Routing Commands 1833
- IP ADDRESS 1835
- IP ADDRESS DHCP 1837
- IP ROUTE 1838
- NO IP ADDRESS 1841
- NO IP ADDRESS DHCP 1843
- NO IP ROUTE 1845
- SHOW IP INTERFACE 1847
- SHOW IP ROUTE 1849
- Chapter 106 1851
- Enabling RIP 1853
- Specifying a RIP Version 1855
- Enabling Authentication 1856
- S1> enable 1858
- S1# configure terminal 1858
- S1(config)# router rip 1858
- S1(config-if)# auto-summary 1859
- Advertising the Default Route 1861
- RIP command 1862
- Adjusting Timers 1863
- AUTO-SUMMARY 1868
- DEFAULT-INFORMATION ORIGINATE 1869
- IP RIP AUTHENTICATION STRING 1870
- IP RIP AUTHENTICATION MODE 1871
- IP RIP RECEIVE-PACKET 1872
- IP RIP RECEIVE VERSION 1873
- IP RIP SEND-PACKET 1875
- IP RIP SEND VERSION 1876
- IP RIP SPLIT-HORIZON 1877
- NO AUTO-SUMMARY 1881
- NO IP RIP AUTHENTICATION MODE 1883
- NO IP RIP RECEIVE-PACKET 1885
- NO IP RIP RECEIVE VERSION 1886
- NO IP RIP SEND-PACKET 1887
- NO IP RIP SEND VERSION 1888
- NO IP RIP SPLIT-HORIZON 1889
- NO NETWORK 1890
- NO PASSIVE-INTERFACE 1891
- NO ROUTER RIP 1892
- NO TIMERS BASIC 1893
- NO VERSION 1894
- PASSIVE-INTERFACE 1895
- ROUTER RIP 1896
- SHOW IP RIP 1897
- SHOW IP RIP COUNTER 1899
- SHOW IP RIP INTERFACE 1901
- TIMERS BASIC 1903
- System Monitoring Commands 1907
- SHOW CPU 1908
- SHOW CPU HISTORY 1909
- SHOW CPU USER-THREADS 1910
- SHOW MEMORY 1911
- SHOW MEMORY ALLOCATION 1912
- SHOW MEMORY HISTORY 1913
- SHOW MEMORY POOLS 1914
- SHOW PROCESS 1915
- SHOW SYSTEM INTERRUPTS 1917
- SHOW TECH-SUPPORT 1918
- Appendix B 1921
- “VLANs” on page 1952 1922
- “Web Server” on page 1953 1922
- Boot Configuration File 1923
- Class of Service 1924
- Console Port 1925
- DHCP Relay 1926
- Enhanced Stacking 1929
- Hardware Stacking 1931
- IGMP Snooping 1932
- IGMP Snooping Querier 1933
- MAC Address Table 1936
- Management IP Address 1937
- Manager Account 1938
- Port Settings 1939
- Secure Shell Server 1943
- SNMP Status Disabled 1945
- Simple Network Time Protocol 1946
- Multiple 1948
- Spanning Tree 1948
- Protocol 1948
- System Name 1949
- TACACS+ Client 1950
- Web Server 1953
- Command Index 1955
Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-8100 Series
Hardware De La Computadora Allied-telesis AT-S95 CLI (AT-8000GS Series) Manual de usuario
(397 paginas)
(397 paginas)
Hardware De La Computadora Allied-telesis AT-S94 CLI (AT-8000S Series) Manual de usuario
(402 paginas)
(402 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.206 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales