Allied-telesis AT-2911GP Network Adapters Manual de usuario Pagina 140

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 139
AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
140
Checking the Port LED on the Adapter
The AT-2911GP adapter card comes with two LED’s. One LED indicates
the link status for the copper port; the other indicates the link status for the
fiber optic port.
Note
Before the port LED can provide troubleshooting information, the
driver software for your particular operating system must be installed
and the adapter must be connected to the network. See Chapter 3,
“Installing the Driver Software” on page 35.
Table 8 describes the link status that LED’s indicate.
Table 8. LED Status
State Description
On Valid link.
Off No link.
Flashing The port is receiving or transmitting network packets
Vista de pagina 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 151 152

Comentarios a estos manuales

Sin comentarios