Allied-telesis AlliedView-EMS 4.0.3 Device-Management Manual de usuario Pagina 453

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 468
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 452
AlliedView™-EMS 4.0.3 Device Management Guide Page 453 of 468
Device Manager LEDs for AT-PBM02 Management Module
RPS Green
Gray
The optional redundant power supply is installed and power is on.
The optional redundant power supply is not installed or it is
installed but not powered on.
Note - The current firmware version does not allow Device Manager to support the Reset
button.
Note - Please refer to PowerBlade Modules for the operations and behavior of the modules
installed on the chassis.
Agent Menu
From the Agent Menu, you can view and edit the system information for the chassis, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - Device Manager allows the user to enter more than 20 characters for the
System Name parameter. However, doing so will result in the following error
message: "The error occurred with 'Set' operation. Error: bad value."
System Date and Time
Displays system configuration for system date and time.
Network Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Note -The Default Domain Name parameter returns unrecognizable characters.
FAN Info
Displays fan speed.
Management Module Temperature
Displays the actual temperature of the management module.
Chassis Temperature
Displays the actual temperature of the chassis.
Power Info
Displays power supply voltage information.
Vista de pagina 452
1 2 ... 448 449 450 451 452 453 454 455 456 457 458 ... 467 468

Comentarios a estos manuales

Sin comentarios