Allied-telesis AlliedView-EMS 4.0.3 Device-Management Manual de usuario Pagina 336

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 468
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 335
AlliedView™-EMS 4.0.3 Device Management Guide Page 336 of 468
Note - The following parameters are not applicable to the AT-x600 series and should
be ignored:
Capability Bits
Advertised Bits
Received Bits
Remote Fault Advertised
Remote Fault Received
Aggregator Port List
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Note - The current firmware version returns a 'noSuchName' value for the Partner
Administrative System ID and Partner Operational System ID parameters.
Note - The current firmware version does not allow the Actor Administrative Status
and Partner Administrative Status parameter to be configured. Attempting to
configure this parameter to any valid value will result in the error "The error
occurred with 'Set' operation. Error: gen error".
Note - The current firmware version does not allow the following parameters to be
set to '0'.
Partner Administrative System Priority
Partner Administrative Port
Partner Administrative Port Priority
Enable
Enables the port.
Disable
Disables the port.
Stacking Menu
From the Stacking menu, you can view and edit the Stacking MIB.
Stack Status
Displays the stack status information of the device.
Vista de pagina 335
1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 467 468

Comentarios a estos manuales

Sin comentarios