Allied-telesis AT-TQ2403 Manual de usuario descargar pdf (Pagina 16)

16 AT-TQ2403 - IEEE 802.11a/jointfilesconvert/1497628/bgh, Dual Radio, Enterprise Wireless Access Point - Installation Guide

Figure 5: Aligning the Access Point for Mounting on the Wall

Place the keyhole slots on the bottom of the access point over the screw heads.

Slide the access point down onto the screw heads so that the access point is securely mounted on the

wall.

You can install the access point either horizontally or vertically.

Mounting the Access Point on a Metal Surface

To mount the AT-TQ2403 IEEE 802.11a/jointfilesconvert/1497628/bgh, Dual Radio, Enterprise Wireless Access Point on a metal

surface, perform the following procedure:

Select a location for the access point.

Turn the access point over and place it on a secure surface.

Screw the four magnets into the back of the access point, as shown in Figure 6.

Figure 6: Attaching the Magnets

4. Mount the access point on a metal surface.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Allied-telesis AT-TQ2403 Manual de usuario Pagina 16