Allied-telesis AT-TQ2403 Manual de usuario descargar pdf (Pagina 11)

AT-TQ2403 IEEE 802.11a/jointfilesconvert/1497628/bgh, Dual Radio, Enterprise Wireless Access Point Installation Guide 11

Figure 1:

Front and Back panels

LEDs

The system LEDs on the AT-TQ2403 IEEE 802.11a/jointfilesconvert/1497628/bgh, Dual Radio, Enterprise Wireless Access Point are

described in Table 1.

Table 1: System LEDs

LED State Description

POWER Off The access point is not receiving power.

Green The access point is receiving power.

TEST Off No system maintenance in progress.

Amber System startup or maintenance in progress.

The LAN LEDs are described in Table 2.

Table 2: LAN LEDs

LED State Description

LNK/ACT (100M) On The access point is operating at 100 Mbps.

Off The access point is not operating at 100 Mbps.

Blinking The access point is sending or receiving data at 100 Mbps

LNK/ACT (10M) On The access point is operating at 10 Mbps.

Off The access point is not operating at 10 Mbps.

Blinking The access point is sending or receiving data at 10 Mbps

The Wireless LEDs are described in Table 3.

Table 3: Wireless LEDs

LED State Description

LNK/ACT (WLAN a) Off No link is detected.

Green An 802.11a WLAN link has been made.

Blinking Green Network activity is occurring.

LNK/ACT (WLAN g) Off No link is detected.

Green An 802.11g WLAN link has been made.

Blinking Green Network activity is occurring.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

Allied-telesis AT-TQ2403 Manual de usuario Pagina 11