Allied-telesis AT-S99 Manual de usuario descargar pdf (Pagina 147)

AT-S73 and AT-S99 Management Software User’s Guide

147

Web Browser To set the operating modes of the AT-CM and AT-CV Line Cards from the

web browser windows:

1. Select Module Status & Configuration from the menu bar.

2. In the Chassis View, click one of the ports on the line card you want to

configure. Alternatively, select the Menu View tab and click the name

of the line card. You can configure only one line card at a time.

3. Click the Setting tab, shown in Figure 58.

Figure 58. Setting Window

4. Click Edit in the Operation Mode section of the window.

5. In the Operation Mode pop-up window, select the new operating mode

for the line card from the pull-down menu. You can select only one

operating mode. The “Line Card DIP Switch Mode” selection activates

the DIP switches on the line card so that the operating mode is

controlled with the switches instead of the management software.

6. Click Update.

The management card automatically updates its master configuration

file with the new setting for the line card’s operating mode. Afterwards,

the Module Status and Configuration menu is displayed again.

The line card resets. When the operating mode is changed on an

AT-CM Line Card, the device has to initialize its management software

and configure its operating parameters before resuming normal

operations. In contrast, the AT-CV Line Cards immediately return to

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 319 320

Sin comentarios

Allied-telesis AT-S99 Manual de usuario Pagina 147