Allied-telesis AT-MCM02 Manual de usuario descargar pdf (Pagina 23)

Chapter 4

Managing a Multichannel Media Converter

After installing an AT-MCM02 Management Module, you can manage an

AT-MCF Series Media Converter in one of three ways. They are:

❑ RS-232 Port

❑ Telnet Program

❑ SNMP Management Program

RS-232 Port

You can manage the media converter through the RS-232 port by connecting

to a terminal or a PC with a terminal emulation program using the control

cable. Configure the terminal or terminal emulation program to the following

settings:

❑ Baud rate: 38400

❑ Parity: None

❑ Start bits: 1

❑ Stop bits: 1

❑ Flow control: none

❑ Emulator: VT100

To start a management session, you must login. The login name is manager

and the password is ati. (The login name and password are case sensitive.)

Once you have logged in, the “>” command prompt is displayed. For

information on the commands, refer to the section “Management Commands”

on page 15.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Sin comentarios

Allied-telesis AT-MCM02 Manual de usuario Pagina 23