Allied-telesis AT-MC602 Manual de usuario descargar pdf (Pagina 46)

Configuration

Install

The Install mode enables a watchdog timer to monitor the link attempt

process. If the network extenders are not able to establish a link using

the parameters you set on the Provider unit within a reasonable amount

of time, a timeout will occur. After a timeout, the default configuration

parameters will be used to establish a link with the highest possible

speed. The default configuration parameters start at 0.94 Mbps

upstream and downstream with negotiation set from Low -> High.

Select the option that corresponds to your mode choice and click the

Apply button.

When the mode has been set, the AT-MC60x Configurator Done

message will appear, as displayed in Figure 26.

Figure 26 Done Message

When you have finished setting the mode on the Subscriber unit, click

the Close button on the bottom right of the AT-MC60x Configurator

menu to exit from the configuration software.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 64 65

Sin comentarios

Allied-telesis AT-MC602 Manual de usuario Pagina 46