Allied-telesis AT-3714FXL Manual de usuario descargar pdf (Pagina 35)

AT-3726XL, AT-3716XL, and AT-3714FXL Installation Guide

3-5

Common Problems

This section lists the common switch problems and the

recommended actions to correct these problems.

Port Activity LED

ON any Port is

OFF

This may indicate:

A loose data cable.

The device at the other end of the connection is turned OFF.

The port is disabled through the software.

Perform the following steps in sequence; you need not proceed to

the next step if the problem is resolved:

1. Make sure the data cables are secure.

2. Make sure the device at the end of the connection is turned ON.

3. Someone has manually disabled the port through the software.

4. Log on to Omega if you can and check the port status (

Port status

and configuration><port number>

5. Refer to the

AT-S20 User’s Guide

to check that the port is

Disabled

If the port is disabled, someone has manually disabled the port

through the software for a specific reason. Verify that the reason no

longer exists before you enable this port (Port status and

configuration menu in the software

)

6. Contact Allied Telesyn’s technical support.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Sin comentarios

Allied-telesis AT-3714FXL Manual de usuario Pagina 35