Allied-telesis AT-3714FXL Manual de usuario descargar pdf (Pagina 24)

Installing the Switch

2-6

4. Mount the unit in the rack.

5. Apply power to the unit as follows:

Caution

Power cord is used as a disconnection device. To de-energise

equipment disconnect the power cord.

Attach the power cord to the unit and plug it in the wall outlet.

Verify that the Power LED lights green. As power is applied to the

switch, the switch runs its own internal testing. See Table 2-1,

LEDs.

If the Power LED does not light green, see Chapter 3,

Troubleshooting

for further information.

Table 2-1

LEDs

LED Color State Description

Power (system) Green

The switch is receiving power, voltage is within the

acceptable range, and the power supply is working.

Note: if only the management software is

malfunctioning, the switch continues to forward

packets.

Off

No power.

Fault (system) Red

The switch or management software is malfunctioning.

Off

Normal operation.

Flashing

Running diagnostics.

Link Green

There is a physical link with a device.

Off

No link.

Activity Green

Flashing

The Ethernet port is receiving/transmitting packets.

Off

No transmits or receives occurring on this port.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Sin comentarios

Allied-telesis AT-3714FXL Manual de usuario Pagina 24