Allied-telesis AT-2716POE Manual de usuario descargar pdf (Pagina 26)

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide

Connecting the Network Cables

The AT-2716POE adapter has one fiber optic connector to connect to the

data network and one copper PoE port for attaching the adapter to a

compatible link partner. The fiber optic connector requires a fiber optic

cable. The copper port requires a twisted-pair cable. For pin signals and

pinout information, see “10/100/1000Base-T Twisted-Pair Port

Connectors” on page 88.

Note

For procedures to clean a fiber optic connection, see Appendix B

“Cleaning Fiber Optic Connectors” on page 91.

To connect the fiber and copper network cables to the adapter, do the

following:

1. Connect one end of the cable to the adapter:

 For the copper port, connect one end of the twisted-pair cable to

the adapter.

 For the fiber optic connector, prepare a fiber optic cable according

to the specifications in Table 2. Connect one end of the cable to

the adapter. See Figure 8 on page 27 for an example of the fiber

optic connector.

Table 2. 100BASE-FX Fiber Optic Cable Specifications

Port Type

Connector

Media

Maximum

Distance

100BASE-FX

Fiber Optic

50 μm

multimode

2,000 meters

(6,561.68 feet)

100BASE-FX

Fiber Optic

62.5 μm

multimode

2,000 meters

(6,561.68 feet)

Warning

The fiber optic port contains a Class 1 laser device. When the port

is disconnected, always cover it with the provided plug. Active

exposed ports may cause skin or eye damage

. L4

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 90 91

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-2716POE Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-2716POE