Allied-telesis 9400 iMAP Manual de usuario descargar pdf (Pagina 27)

Installing the FPH Configure Local Terminal or PC

1-23

Telesyn x400 - Installation Guide (Installation of ATI 9400)

1.17 Configure Local Terminal or PC

The RS-232 (CONSOLE) terminal port is used during the initial installation startup to connect the ATI 9400 to a

local management device, which can be:

•

A terminal (VT-100 compatible)

•

A PC with terminal emulation software

The CONSOLE port is a DB9 female socket configured as a DCE, which allows for the direct connection to the

terminal or PC. Refer to 2.9.1 for a listing of DB9 pin assignments.

The settings for the CONSOLE port are initially configured with the following default values

Note: When using the CONSOLE port, ensure that the terminal emulation software has FLOW

CONTROL disabled.:

Connect the RS-232 cable from the terminal or PC to the ATI 9400 TERM port.

If the device is a PC, bring up the terminal emulation window.

TABLE 1-7

Default Asynchronous Port Settings

Option Default Option Default

ATTENTION BREAK MAXOQLEN 0 (Unrestricted)

CDCONTROL IGNORE MTU 1500

DATABITS 8 NAME ASYN 0

DEFAULTSERVICE FALSE OUTFLOW HARDWARE

DTRCONTROL ON PAGE 22

ECHO ON PARITY NONE

FLOW HARDWARE PROMPT DEFAULT (CMD>)

HISTORY 30 SECURE ON

INFLOW HARDWARE SERVICE NONE

IPADDRESS NONE SPEED 9600

IPXNETWORK NONE STOPBITS 1

When using an AC-powered terminal or PC, use an RS232 line isola-

tion unit between the terminal/pc and the RS232 port. For battery-

powered devices (laptop) this is not required.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Sin comentarios

Allied-telesis 9400 iMAP Manual de usuario Pagina 27