Allied-telesis 9400 iMAP Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 38
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Install the Chassis Install the Control Module
1-19
Telesyn x400 - Installation Guide (Installation of ATI 9400)
FIGURE 1-13
CFC24 Faceplate
3.
Press the release button on the inside of the latches and push the latches out. (Refer to Figure 1-14.)
4.
Locate the double slot (2 and 4) where the card is to be inserted.
5.
While holding the latches/faceplate, slowly with a firm pressure push the card into the double slot until the
latches begin to engage the locking rail.
Note: A firm pressure is required to seat the card. The lock-latch does not assist in seating the card.
6.
Close the latches until they lock into place.
FIGURE 1-14
Latch in the Out Position (Release Button has been Engaged)
FIGURE 1-15
Detail of the lock-latch in locked and then opened position
ACT
RIT
JOR
NOR
CFC
24
TN-400-A
TN-400-A
ULL FAUL T INSRV
ACO'LT
SWACT
CONSOLE
MGMT
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Comentarios a estos manuales

Sin comentarios