Allied Telesis Switch AT-S79 Manual de usuario descargar pdf (Pagina 190)

Chapter 17: Port Trunking

190 Section II: Using the Web Browser Interface

Creating a Port Trunk

This procedure explains how to create a port trunk.

Note

Do not connect the cables of a port trunk to the ports on the switch

until after you have configured the ports on both the switch and the

end node. Connecting the cables prior to configuring the ports can

create loops in your network topology. Loops can result in broadcast

storms, which can adversely affect the operation of your network.

To create a port trunk, perform the following procedure:

1. From the Advanced Config menu, select Trunk Config.

The Trunk Configuration page is shown in Figure 54.

Figure 54. Trunk Configuration Page

If the switch does not contain a port trunk, all of the ports on the switch

are unchecked. If there is a port trunk, the ports in the trunk are

checked.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 241 242

Sin comentarios

Allied Telesis Switch AT-S79 Manual de usuario Pagina 190