Allied Telesis AT-A15/LX Guía de instalación Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
Installing the Switch
50
6. Connect one AT-CABLE-4 cable between the IS-A ports on the
master switch and a slave switch, and another AT-CABLE-4 cable
between the IS-B ports on the master switch and the other slave
switch. Refer to Figure 3-8.
Figure 3-8 Valid Cabling Configuration for a Stack of Three Switches
Note
A stack of three switches can have only one cable between the
switches.
Figure 3-9 illustrates an invalid cabling configuration for a
stack of three switches.
Figure 3-9 Invalid Cabling Configurations for a Stack of Three Switches
IS-A IS-B
STACK ID
0
IS-A IS-B
STACK ID
0
IS-A IS-B
STACK ID
0
1
2
3
Master switch
Slave
Port IS-B
Port IS-B
Port IS-A
Port IS-A
Slave
switch
switch
IS-A IS-B
STACK ID
0
IS-A IS-B
STACK ID
0
IS-A IS-B
STACK ID
0
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 91 92

Comentarios a estos manuales

Sin comentarios