Allied Telesis AT-A15/LX Guía de instalación descargar pdf (Pagina 42)

Installing the Switch

Selecting a Site for the Switch

Be sure to observe the following requirements when choosing a site

for your switch:

# Make sure that the switch’s power is accessible and cables can

be connected easily.

# Cabling must be away from sources of electrical noise such as

radios, transmitters, broadband amplifiers, power lines,

electric motors, and fluorescent fixtures.

# Air flow around the switch and through its vents on the side

and rear must not be restricted.

# If you are installing the switch on a desk, make sure it is placed

on a level, secure desktop.

# Do not place objects on top of the switch.

# Do not expose the switch to moisture or water.

# Make sure it is in a dust-free environment.

# Use dedicated power circuits or power conditioners to supply

reliable electrical power to the network devices.

Having selected a site to install the switch, go to one of the following

procedures:

# Installing the Switch as a Standalone Unit on page 3-43

# Building a Stack of Two Switches on page 3-46

# Building a Stack of Three Switches on page 3-49

# Building a Stack of Four to Eight Switches on page 3-52

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Sin comentarios

Allied Telesis AT-A15/LX Guía de instalación Pagina 42