Allied-telesis AT-WA1004G Manual de usuario descargar pdf (Pagina 64)

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless

Router's Access Point, regardless of the operating system which is used

on the client.

To use the Wireless Access Point in the Wireless Router, each Wireless

Station must have compatible settings, as follows:

Mode The mode must be set to Infrastructure.

SSID (ESSID) This must match the value used on the

Wireless Router. The default value is default.

Note: The SSID is case sensitive.

WEP By default, WEP on the Wireless Router is

disabled.

❏ If WEP remains disabled on the Wireless

Router, all stations must have WEP

disabled.

❏ If WEP is enabled on the Wireless Router,

each station must use the same settings

as the Wireless Router.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 141 142

Sin comentarios

Allied-telesis AT-WA1004G Manual de usuario Pagina 64