Allied-telesis AT-WA1004G Manual de usuario descargar pdf (Pagina 49)

AT-WA1004G User’s Guide

Windows Clients

This section describes how to configure Windows clients for Internet

access via the Wireless Router.

The first step is to check the PC's TCP/IP settings.

The Wireless Router uses the TCP/IP network protocol for all functions,

so it is essential that the TCP/IP protocol be installed and configured on

each PC.

TCP/IP Settings

Overview

If using the default Wireless Router settings, and the default Windows

TCP/IP settings, no changes need to be made.

❑ By default, the Wireless Router will act as a DHCP Server,

automatically providing a suitable IP Address (and related

information) to each PC when the PC boots.

❑ For all non-Server versions of Windows, the default TCP/IP setting

is to act as a DHCP client.

If using a Fixed (specified) IP address, the following changes are

required:

❑ The Gateway must be set to the IP address of the wireless router.

❑ The DNS should be set to the address provided by your ISP.

Note

If your LAN has a router, the LAN administrator must reconfigure the

router itself.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 141 142

Sin comentarios

Allied-telesis AT-WA1004G Manual de usuario Pagina 49