Allied Telesis AT-FH708E Guía de instalación descargar pdf (Pagina 20)

Cabling Specifications

Category 5 UTP/STP for 100 Mbps; Category 3, 4, or 5 UTP for 10 Mbps

Maximum of 100 meters between hub and network node

Electrical Specifications

Power: External power supply with 100 to 120

VAC or 200 to 240 VAC, 50/60 Hz input.

UTP (RJ45) Connector

Figure 5 shows an RJ45 connector. For a 100Base-TX link between

switches, —any two Medium Attachment Units (MAUs)—you need a

crossover cable. For a connection to a Network Interface Controller (NIC),

the cable is wired straight through.

Figure 5

RJ45 Connector

Network Specifications

Table 4 provides an overview of IEEE 802.3 and 802.3u specifications for

10Base-T and 100Base-TX network configurations using twisted-pair

wiring.

Pin 1

Pin 8

Table 4

IEEE 802.3 and 802.3u Network Specifications

10Base-T 100Base-TX

Media UTP Category 3, 4 or 5 UTP/STP Category 5 only

Topology Star, Tree Star, Tree

External Devices Network Adapter Card,

Repeater

Network Adapter Card, Repeater

Maximum Segment

Length

100 meters (328 feet) 100 meters (328 feet)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Allied Telesis AT-FH708E Guía de instalación Pagina 20