Allied-telesis IE200 Series Manual de usuario descargar pdf (Pagina 33)

Chapter 1: Overview

AT-IE200 Series Installation Guide 33

SFP LEDs

The SFP LEDs are located to the right of the slots. Each slot has one LED that indicates the speed and link/

activity status of the SFP.

Table 6: Port LED Descriptions for the AT-IE200-6GP and AT-IE200-6FP Switches

LED Status Description

PoE Off Indicates one of the following:

 The port is not connected to a powered

device (PD).

 The PD is powered off.

 The port is disabled in the management

software.

 PoE is disabled on the port.

 The LEDs are turned off. To turn on the

LEDs, use the NO ECOFRIENDLY LED

command.

Solid green A PD is receiving power from the port.

Solid amber The switch has shut down PoE+ on the port

due to a fault condition.

Flashing amber The switch is detecting a PD on the port but is

not delivering power to it because the

maximum power budget has been reached

Link/Activity Off The port has not established a link with

another network device or the LEDs are

turned off. To turn on the LEDs, use the NO

ECOFRIENDLY LED command.

Solid green The port has established a 100 Mbps (AT-

IE200-6FP) or 1000 Mbps (AT-IE200-6GP) link

to a network device.

Flashing green The port is transmitting or receiving data at

100 Mbps (AT-IE200-6FP) or 1000 Mbps (AT-

IE200-6GP).

Solid amber The port has established a 10 Mbps (AT-IE200-

6FP) or 10/100 Mbps (AT-IE200-6GP) link to a

network device.

Flashing amber The port is transmitting or receiving data at 10

Mbps (AT-IE200-6FP) or 10/100 Mbps (AT-

IE200-6GP).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 69 70

Sin comentarios

Allied-telesis IE200 Series Manual de usuario Pagina 33