Allied-telesis AT-S62 Manual de usuario Pagina 326

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 760
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 325
Chapter 20: Power Over Ethernet
Section II: Advanced Operations 326
6. To change the port’s priority, type 2 to select Power Priority and,
when prompted, type C for Critical, H for High, or L for Low. A port can
belong to only one priority level at a time. The default is Low. For an
explanation of this parameter, refer to Port Prioritization on page 321.
7. To change the maximum amount of power the port can supply to the
device, type 3 to select Power Limit and enter a new value in
milliwatts. The default value is 15,400 mW.
A change to a parameter value is immediately activated on the
switch.
8. After making your changes, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.
Vista de pagina 325
1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 759 760

Comentarios a estos manuales

Sin comentarios