Allied-telesis AT-MCF2012LC/1 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
AT-MCF2012LC and AT-MCF2012LC/1 Media Converter Modules Installation Guide
27
Twisted Pair Port Flashing
Green or
Amber
The twisted pair port of the channel
can establish a 100 Mbps (green) or
10 Mbps (amber) link with its
networking device, but the fiber optic
port is unable to establish a link with
its remote device. For troubleshooting
suggestions, refer to Problem 4 in
Chapter 3, “Troubleshooting” on page
55.
Fiber Optic Port Off
Twisted Pair Port Off The fiber optic port of a channel can
establish a 100 Mbps link with its
networking device, but the twisted pair
port is unable to establish a link with
its local device. For troubleshooting
suggestions, refer to Problem 3 in
Chapter 3, “Troubleshooting” on page
55.
Fiber Optic Port Flashing
Green
Twisted Pair Port Flashing
Green or
Amber
Both ports in the channel can
establish a link to a networking device,
but one of the ports is connected to
another media converter that also
supports the Smart MissingLink
feature, forming a chain of converters.
A link has been lost on one of the
ports in the chain, causing a ripple
affect through the chain of converters.
Alternatively, one of the ports is only
able to form an intermittent link with its
networking device.
For troubleshooting suggestions, refer
to Problem 8 in Chapter 3,
“Troubleshooting” on page 55.
Fiber Optic Port Flashing
Green
Table 5. “L” Link LEDs in the Smart MissingLink Mode (Continued)
Channel Port
Link LED
State
Description
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Comentarios a estos manuales

Sin comentarios