
Appendix B: AT-GS950/8 Default Parameters
392
Port State Disable Enable/Disable/Ignore
Bridge/Trunk Config/Trunking
Trunk Status
Disabled Active/Passive/Manual/Disabled
Bridge/Trunk Config/LACP Group Status
System Priority
32768 32768
System ID
MAC Address of
AT-GS950/8 switch
-
Port Priority 0 0 - 65535
Bridge/Mirroring
Mirroring Status Disabled Enabled/Disabled
Mirroring Port
1All, 1 - 8
Ingress Mirrored Port -
All, 1 - 8
Egress Mirrored Port -
All, 1 - 8
Bridge/Loopback Detection
State Disabled Enabled/Disabled
Interval 2 seconds 1 - 32767 seconds
Recover Time 60 seconds 0 or 60 - 1000000
Port -
All, 1 - 8
Loopback Detection
State
Disabled Enabled/Disabled
Bridge/Static Unicast
802.1Q VLAN - ID 1 - 4093
Port-Based VLAN
Index
- ID 1 - 52
MAC Address none xx:xx:xx:xx:xx:xx hex format
Table 9. AT-S113 Management Software Default Settings (Continued)
Parameter
AT-GS950/8
Default Setting
Specifications
Comentarios a estos manuales