Allied-telesis AT-FS202SC/FS4 Manual de usuario descargar pdf (Pagina 13)

AT-FS20x and AT-FS202SC/FSx Series Installation Guide

Table 1 lists the maximum operating distances for the switches.

Table 1 Maximum Operating Distances

Features

The AT-FS20x and AT-FS202SC/FSx Series Switches have the following

features:

❑ LEDs for unit and port status

❑ Auto MDI/MDI-X

❑ External AC/DC power adapters (North America, Continental Europe,

or United Kingdom)

❑ DIP switches for configuring the ports

❑ Half- or full-duplex operation on both ports

❑ RJ-45 twisted pair connector

❑ SC or ST fiber optic connector

❑ Data packet forwarding and filtering at full wire speed (10 Mbps to

100 Mbps, 100 Mbps to 100 Mbps, and 10 Mbps to 10 Mbps)

Model

100Base-FX 10/100Base-TX

Connector

Maximum

Operating

Distance

1. Maximum distance for 100 Mbps optical datalinks is dependent on the following factors: type of optical fiber,

duplex mode of both end-nodes, and maximum optical loss budget for each of the optical fiber at the operating

optical wavelength.

Connector

Maximum

Operating

Distance

2. Maximum distance can only be obtained when the UTP/STP cabling is installed and verified to TIA/EIA 568A

Commercial Building Telecommunications Cabling Standard.

AT-FS201 ST 2 km (1.2 mi) RJ-45 100 m (328 ft)

AT-FS202 SC 2 km (1.2 mi) RJ-45 100 m (328 ft)

AT-FS202SC/FS1 SC 15 km (9.3 mi) RJ-45 100 m (328 ft)

AT-FS202SC/FS2 SC 40 km (24.8 mi) RJ-45 100 m (328 ft)

AT-FS202SC/FS3 SC 75 km (46.5 mi) RJ-45 100 m (328 ft)

AT-FS202SC/FS4 SC 100 km (62 mi) RJ-45 100 m (328 ft)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Sin comentarios

Allied-telesis AT-FS202SC/FS4 Manual de usuario Pagina 13