Allied-telesis AT-2911 Series Adapters Manual de usuario descargar pdf (Pagina 33)

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User’s Guide

Replacing the Bracket

The AT-2911 series adapter is shipped with the low-profile bracket

attached to the adapter. Depending on your PC, you may need to replace

the bracket attached to your adapter.

The following procedure describes how to remove the low-profile bracket

from the adapter and replace it with the standard bracket. You can also

use this procedure to remove the standard bracket and replace it with the

low-profile bracket.

To replace the low-profile bracket with the standard bracket, perform the

following procedure:

1. Remove the screws that attach the bracket to the adapter. See

Figure 9.

Figure 9. Removing the Low-Profile Bracket

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

Sin comentarios

Allied-telesis AT-2911 Series Adapters Manual de usuario Pagina 33