Allied-telesis AT-2911 Series Adapters Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
AT-2911 Series Gigabit Ethernet Network Adapters Installation and User’s Guide
21
Note
An SFP transceiver must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
The SFP slot is shown in Figure 7.
Figure 7. SFP Slot
LEDs The AT-2911 series adapter has an LED per port.
Table 1 describes the link states that the LED indicates.
Table 1. LED Status
State Description
On Valid link.
Off No link.
Flashing Data traffic is present between the adapter and the
switch.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

Comentarios a estos manuales

Sin comentarios