Allied-telesis AlliedView-EMS 3.10 QoS MANAGER Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Property
Name
Description Valid Values
is to be checked.
Match3 Specifies the actual data to
match
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Mask3 Specifies whether the
corresponding bit in the
Match3 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Offset3 Specifies the location or offset
where the pattern for Match3
is to be checked.
Range: 0-62
Protocol Specifies the protocol of the
packet.
This can be set by selecting any
of the following values:
IP
IPv6
ARP
IPX
NONIPIPX
any
This can also be set by entering
a 1- to 5- byte hexadecimal
value (00-FFFFFFFFFF).
Source TCP
Port
Specifies the TCP source port
of a TCP/IP packet.
Range: any, 0-65535
Destination
TCP Port
Specifies the TCP destination
port of a TCP/IP packet.
Range: any, 0-65535
TCP Flags Specifies the TCP flags of a
TCP/IP packet.
This can be set by selecting one
or more of the following values:
URG
ACK
RST
SYN
FIN
any
Source UDP
Port
Specifies the UDP source port
of an UDP/IP packet.
Range: any, 0-65535
Destination
UDP Port
Specifies the UDP destination
port of an UDP/IP packet.
Range: any, 0-65535
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 39 of 128
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 127 128

Comentarios a estos manuales

Sin comentarios